Polish

At one time I had twin UNI foam flters.........they were a magnet for sand on the out side.........but on the inside they were absolutly clean.......thus they were so gooped with sand on the outside that I felt it wasnt breathing properly..........Major clogging............in turn I switched to K/N w/ outerwears

Looks like something B.B. king would play...........

Lots of burrs..........

I had done the same thing before i had mine powder coated........and i weiged the parts and tabs i removed........and it scaled 5lbs...........nice

I have the same set up 400 / 4/mill stroker long rod blaster pistons 22cc big bore domes 34mm carbs t-5 pipes....(now i run CPI) with this set up it put out 71 HP good luck

I have the same set up 400 / 4/mill stroker long rod blaster pistons 22cc big bore domes 34mm carbs t-5 pipes....(now i run CPI) with this set up it put out 71 HP good luck

When I put a stroker crank in myself.............I didnt have to remove the clutch basket and the C-clip the holds the two halves togather...........Mine is a 2004 and I am the original owner.........weird..........I was told about the C-clip before my build last year by a mecanic..........im baffled ...........is it because my bike is a newer model.....(no one else has worked on my bike).......... and my cases split no problem!! anyways good work!..........this topic should be pinned for anyone else that wants to do it themselves!!!

I had the same problem..........so I bought the thumb throttle from modquad......its long and easier to use.......

Jimmy Johnson WINS!!!!!!!!

nice parts.......sure would be nice to buy those cases and have them powder coated good prices

good to know!......i was looking for blue antifreeze....(but didnt want to pay for blue Ice).........that will match my shee perfectly

bro shee riders stick togather........I can understand making a little money, and thats all good! but remember this is a community of good people.........and to me it just seem your intentions were not right.........maybe im wrong! anyways welcome to the HQ

Damn good ......you keep an ...on HQ ripoffs...........and Ill keep an on your Avitor............shes hot! Again Good eye Jay

Contact John at Alba in the R+D dept............he has the specs for that motor..........and the correct jetting needed (858) 486-4380

your right ......me personally i would not get the spacer plate either.......I use blaster pistons, and I have no problems.....W/ cool head and 22cc BB domes

are those sleeper cylinders? must hall a ss

Thats one nice shee Is it me or does the shee just look badass............

you have a nice website everyone needs to check you out http://www.dunedevilinc.com/ tyce

what is that?

I measure for Home Depots In Southern Calif.......(flooring) Measurecomp.com

PM sent

How bout $70.00 including shipping........I have Pay pal

I have some LMK if interested

Yamalube...........78.3:1