Jump to content

Banshee 79

Members
  • Posts

    217
  • Joined

  • Last visited

Everything posted by Banshee 79

  1. I have a K&N Air Filter With Outerwear, Airbox Lid On, Snorkel Removed. I have FMF Fattys With Powercore Silencers. I was Wondering If Anybody Is Running This Setup And What Mains There Using And Pilots And Clip Position Thanks!!!!!!!!!!!!!!! I Am 927 Feet Above Sea Level. I have four 1 inch by 1 inch holes cut in the airlid.
  2. I Would Try Some Penetrant Oil Like WD-40 And let it soak for about 15 minutes. Then Tap Your Pipe Wrench With A hammer. Be Careful Not To Damage The Nuts With Your Pipe Wrench. Hope This Helps!!!!!!!!!!!!!!!!!!!!!!!!
  3. I Am A New Banshee Owner And Was Just Wondering What Brand Of 2-Cycle Oil Was Best And What Ratio To Mix It At!!!!!!!!!!!!!!!!!!!!!!!!
  4. Thanks For The Reply. I am a new Banshee owner so i was just going by what yamaha reccomended. I thought that was a pretty rich oil mixture also.
  5. The Banshee Is Bone Stock With Stock Jetting. I Am Running Yamalube R At 24:1Thanks For The Replies!!!!!!!!!!!!
  6. Thanks for The Reply Big Red. I just bought this Banshee, ive owned a blaster since 1990 and never had any problems like this. It blows oil all over the swingarm and ground weird shit.
  7. I Have A 2002 Banshee Both Silencers Have Puddles of Oil In Them. I took them off and drained them and there was a thinned gas/oil mixture. Never seen this on a 2-stroke before. Anybody have this problem or know what it is????? There is a large amount of oil. Any help would be appreciated!!!!!!!!
×
×
  • Create New...