BURKE_DADDY

took me a few seconds till i got it,thats funny as shit.

if .003 is perfect how far over or under .003 can you run the pistons at?

http://www.bansheehq.com/forums/index.php?...topic=19955&hl= check out this post lots of good info in there.

hello, what size street shoe do you were?and why are you selling these boots? thank you

http://gtthunder.com/YFZ450/2006YFZ450.htm heres something i found on the web.

carlin didn't author this paper check out snopes.com it would have been alot funnier if carlin wrote it http://www.snopes.com/katrina/soapbox/carlin.asp also this site is one of my favorites, all kinds of strange stories and if there true or not.

thats the only time ill take pain pills is when im in pain. i dont like the way they make me feel when i dont need them. never really understood why people like to take pain pills for fun, not my cup of tea i guess,roll up a fatty and im all over it though

mine were coming in all funkered up sideways and shit i didnt get knocked out or an iv or anything like that. they did the worst one first then let me heal up and the other 3 came out weeks later.gave me hydrocodone ie vicodin lortab but i soon learned it was like taking sugar pills second time he gave me some percocet and it helped some but the dentists, atleast around here will not give very much in the way of pain pills i got 10 5mg percocets asshole i needed that per day let alone the whole week or so i was in pain and bleeding.mine were pretty bad and hurt like a mother.if i had to do it over i would go somewhere that would put me under while it was happing. that sucked sitting there awake while it happened. hopefully yours will go smooth and painless good luck

http://www.thumperfaq.com/oil.htm while this article was written for 4strokes it still has some good info about oil.

hello,when we put the banshee back together i installed the chain wrong, i put the chain on top of the bottom roller and after a very short 5min break in ride it ate the whole flippin roller.my question is can i run the banshee without a lower roller untill i get a new one?im supposed to go with my buddy so he can test drive my raptor im selling in the morning.will it be allright? if not what do i risk by running it with out the lower roller?also i have a buddy with a blaster will the rollers from the blaster work on the banshee? thank you for any help you can give me

can you elaborate and give us the reasons why? thank you

thank you i knew i saw them somewhere.

hello, while trying to put my case saver on i cracked the stock plastic neutral switch.does anyone make a metal replacment or do i have to use plastic? thank you

http://www.bansheehq.com/forums/index.php?...63&hl=plug+chop

all the items ive bought on ebay that came from some other country, they put on the customs tag it was a gift so they didnt have to pay extra taxes,dutys or something like that.

after talking to some people and some looking around i found the carb blueprints and the bottom and one of the 2 nipples are overflow and the other one is a vent . thank you for the replys and help

we posted at the same time but you were a little faster.im going to block them of by putting some hose on them then sticking an empty 22 shell in the other end to block it off unless these a better way? thank you

im trying to make it more trail friendly. maybe in the future ill try out the duals.but for now i want to run the single, if i can figure out what to do with these nipples.

thanks for the replys, both of the carbs have chokes on them.so do i just put tubes on them or block them off? i would think to block them off to be on the safe side and not risk an air leak and cause a lean condtion?but i have no clue.i looked on the mikuni website but didnt have any luck there. thank you for your help

hello, i am about to get the banshee up and running today.Ive went with a 2 into 1 carb setup and will be using 1 of the 2 mikuni 34mm flat slide carbs that originally came with my banshee.my problem is i know one of the 2 nipples on the carb had a rubber tube connected to the other carb but now that i don't have 2 carbs do i just plug it off?and theres another nipple on the opposite side of the carb, i don't think anything was hooked up to it.should i plug off that nipple or what do i do with them.also theres a gold maybe brass nipple on the bottom of the bowl.do i just leave it alone or what should i do?and what do these nipples do?i can blow air through all 3. thank you

does this trick work with other than stock carbs?i have a pair of mikuni 34flat slides im swaping out for a 2into 1 setup and was wondering how to get the cables out. thank you

are these still forsale? i pmed you but my bansheehq account hasnt been working right for the last 2 weeks or so.let me know.my email is [email protected] thank you

SOLD Money sent via paypal. thank you

hello, are these chrome t5s?what condtion are the toomeys in?can you send me some pictures to [email protected] thank you