Hello, i was ridding my banshee the other day and all of a sudden there was no pressure on the clutch cable, the clutch lever moved freely with no resistance. i could pull it in freely.then it quit doing it and seemed fined,it only did this for about 50 to 100 feet while i was driving in second gear putting along then it was fine. i pulled over and was messing with the adjustment on the clutch lever when the hollow adjuster bolt broke on the cable. so i towed it home . i then looked at the clutch arm on the top of the engine where the cable hooks to and i could move it with my hands. i just took the side cover off and found one of the clutch plates wasn't in the groove like the rest were i will try to post some pictures below. my question is should i put the clutch plate back in the groove and start ridding or is this a sign of bigger problems or what shall i do.
thanks for the help
I