harley_sr

I have a Banshee I am going to be getting rid of soon. I will get a pic. tomorrow. The banshee is a early 90's (2, 3 or 4) Not sure it does have a-arms. But the list of mods are Rocket InFrame Drag Pipes (new) Noss Head (new) 20cc Domes (new) 28mm PWK Carbs Delta V-Force II Reeds (new) Uni Clamp On Filters Ricky Stator Timing advance plate (new) Hinson Clutch Basket (new) Street Bike Clutch Fibers (new) New Pistons Wisco (about 2-3 months on them) Ported Jugs +8in Swing Arm New 18x9-8 Turf Tames on 8x8 ITP 190 Wheels (new) Race Wiring Harness 240pc. Stainless Steel Nut and Bolt kit (new) (NEW barnette CARBON FIBER Clutch used one weekend untill I got my hinso set up in, w/ the street bike fibers) Most of the parts are new, I bought the banshee used, and have redone most of it. The bike runs strong, just took it to the track and ran 8.16 @ 77mph (1/8th), and also ran 13.70 in the 1/4 mile @ 86mph. Still have the time slip. Starts 1st or 2nd kick every time, also runs on 110 Race gas. Looking to get $2400 OBO.

sent you a PM.

I have a set of 28 mm carbs for a banshee. They are PWK Kehin (SP?) They are in good shape a little dirty, but work flawlessly. $160 shipped.

They are scooter tires, I use them for drag racing the 1/8th. The size is 120/90-10

I have a set of trinity out of frame drag pipes for sell on ebay. Take a look. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2489579875

BUMP

I have a set of Rocket In Frame Pipes, they came bare, and I painted them black. The silencers are still polished, just painted the steel parts.. . They have very little use. 2 weekends at the drag strip, thats it, still in great condition, they do have a couple small dings in them, came that way in shipping. No trades just looking for cash, I have to replace a lot of clutch parts.... $360 shipped...

gonna have to do better than that. RM ATV sell them new for $30.. I already ordered one. Thanks any ways..

I need a banshee rear brake line for a +6 or a +8 swing arm.. Let me know if you have a used one or if youi sell new ones...

Thanks for the heads up Screamin_Banshee, but I just sold them!

Well i found a Barnette Clutch, the guy told me it was a Carbon Fiber clutch, w/ springs, and steels.. Is that clutch any good? He told me that it was the best one barnette made..

Ok with the clutch and all what is a good oil to use in the crank case on a banshee? I was looking into some AMSOIL, the dealer told me its for a wet clutch set up, its a full synthetic. What do most of yall use?

bump any one???

I am open to different clutches, and different pricing. I am just trying to see whats the best clutch for the money is? Any one heard of the EBC? I dont care for barnette, but any other? I would love to get a hinson set up, but just dont have the cash to swing that way right now..

I have heard of a street bike clutch working on a banshee? Witch one? What all is needed to make it work, and do I have to modify any thing?

well the guy who helped me build it took the cylinders and polished the intake and exhaust to a smooth finish, he said that any less restriction is better. Also I got 112 cause the shop that sells it here was out off 110. I normally run 110, and thats the lowest octane they carry..

Now we only raced the 1/8th, I know he would kill me in the 1/4. I am not just piped and jetted. I have a new top end, .80 over, trued and welded crank, PWK 28mm -Slide carbs, Uni Clamp on filters, Noss Head w/20cc domes, 112 gas, I have a mild port job, More of a polishing, made the intakes smooth as glass. Now I have some other little mods such as billet impeller, timing advance plate, and some other little things. I will be at the track tomorrow night, and will post some time slips. My clutch is slipping a little so I will get slip for tomorrow, and I will get some new ones for next week when I get my clutch...

I was looking at a raptor clutch set up, and looking at some fibers for a banshee, will they interchange? They look identical.. Any one know?

I am looking for a good clutch, mine is slipping pretty bad right now. Whats the news on a good set up?

Well I am a beliver!!! I have a set of trinity out of frames, and some rocket pipes inframe. NO BS the rocket pipes almost cut a full 2/10ths off my time at the track... I did not change a thing, just unbolted the trinity pipes, and put the rockets on, no carb adjustments, or any thing, just straight swap!!! If you have been thinking of getting a set, GET THEM!!!!! I also out run a R6 street bike in the 1/8th. Now I am not saying he is a pro rider, but he is a good rider..

Size 19x8-10 JR Drags have about 3/4 tread left, retail for 95ea Looking to get $120 for the pair + S&H

I have a couple items for sell on ebay. Here is a link http://cgi6.ebay.com/ws/eBayISAPI.dll?View...&include=0&rd=1

Ok I need help quick. I need to know if a harness and cdi off a 200 will work on a 91 banshee. The harness and cdi are a match set off a 2000, but will it hook up to my 91 motor? The tors is already off. Please let me know!

Nope these are brand new..

I have a brand new set of out of frame drag pipes. They are chrome and come with chrome hangers, BRAND NEW!!! http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2487937749