FireHead

I also went to Catholic school adn pretty muh partcipated in the religion until the middle of high school. Then I kind of just got tired of it. I discovered this rock thing was true. Jerry Lee Lewis was the devil and Jesus was an architect previous to his career as a prophet. All of a sudden I was in love with the world and all I could do was dinga ding dang my danga long ling long. In other words Jesus built my hot rod.

Does anyone have any pictures of an installed AC chassis skid plate. It wouldn't surpirise me if it didn't fit right, but I'd like to see how its supposed to fit.

I htink it's a M10x1.75, but then I again I'm not sure if you want to go asking about nut size in a predominantly male dominated forum.

They press in and out. THe main problem winds up being that the aluminum they press into gauls away and your left with a loose fitting stud that spins when you tighten it.

If you can find somebody with a hotwire set up that is best. You can use the same thing to cut your plastics when youre done with your seat.

It depends on where and how its bent. If it doesn't ruin the mwhile riding around, it will probably take care of them when you go to change the axle.

I was dissappointed that I couldn't watch the PH video. So I got drunk

I gota big dick too. And you like it? Why in the world in any post would you randomly start talking about the size of your dick? Anyways, I am an ignorant, white, imbred, cracker, witha big black dick. What do ya think about that. I may need to get back into the Do You Get on Here While Drunk Thread.

I love porn!

Apples make me sad. They are great for graphics rendering though.

The only reason I know where Newfoundland is, is because my girlfriend is from Burnaby B.C. and her family still lives there and has a think for making jokes about Newfys. I personally enjoy making jokes about about the imbred hillbillys from Demming which is a town about 45 minutes to the east of Bellingham. The jokes about Newfys and Imbred hillbillys are aslo vey similair. I just was never sure why Canadians make fun of Newfys. Who do Newfys make fun of?

I should ask my girlfriend this as she is Canadian, but I'm going to ask this here anyways. Why is it that main land Canadians make fun of Newfys (Newfoundland)? None of the jokes her family tells about them make very much sense to me, but if you replace Newfy with a trailer park resident in almost all of the jokes it winds up being just as funny. Granted I'm retarded, but it would be coo if someone could answer my question.

I'm not going to ask the guy I know anything specific, just for your fantasy NASCAR league. Although if I play my cards right I will be working for them next fall, at that point I fill ya full of all the b.s. you want.

Lemans cars do not have a fuel specification. THey use whatever the car's engine was built to run on. It looked like race gas to me. My buddy who works for Earnhardt Inc. hasn't called me back yet today, I figured on giving him a hard time if that was a car he was working with.

not a nitrogen sprung shock. It is common knowledege that nitrogen is used to charge the shock, not spring it. In emulsion dampers the nitrogen is used to maintain pressure on the piston, and to prevent foaming. If you have some pictures of different SCORE and CORR cars and trucks set up with AIR BAG's I'd love to see them... I think you and I are working on a misunderstanding. I took it as you were trying to say that the Fox Float and Air Series shocks were an air bag type shock, which they most certainly are not. I was not speaking of charging a shock with nitrogen inorder to prevent aeration in the dampening circuit. I am speaking of shock absorbers that also contain the equivalent of a mechanical spring, which in the case I speak of is nitrogen gas. I am only speaking of the Fox shock absorbers as I really don't know any thing about other brands except for King and Sway-away. I did a ton of engineering consulting work for Fox . Anyways, the pictures I have are on my snap server at home, I'll post them later this evening.

Does anyne know off of the top of their heads or would be willing to check the dimensions of a swingarm bolt, bearings, and spacer sleeve?

Does anyone know if stroker replacement crank webs are availabe? If so, who sells them? Would it be possible to put the stroker webs on a stock crank or a stock stroke crank? This may be a stupid question.

I've had the same problem with FedEx. They seem to only find my house every few tries and I am on a road, not down one. The worst part is, I have to call them every time they don't find my house and give them directions. I wish they wouldn't hire retards that can't read a map.

I take you don't really look at the trucks and buggies if you follow SCORE Racing. Most of the buggies run atleast one Nitrogen sprung shock at a corner. Most of the time this is in conjuction with a mechanical spring shock absorber. I have many, many pictures of multiple different SCORE and CORR cars and trucks set up this way. If you'd like to see them I'd be more than happy to toss up a few.

They are a great all around shock. I have a set of prototypes that I got from Fox last year. They are very similair to the current production Fox Floats that just came out. There isn't much maintenance on them and you can adjust them for whatever you are doing since there isn't a mechanical spring. I always charge mine with Nitrogen, not oxygen. Oxygen is corrosive and may be the reason peoples seal fail. At any rate for jumping and drag racing there really isn't a better shock out there.

What is the overall length of an OEM Banshee axle?

Does anyone have the equivalent onf a swing arm bearing kit? I'll take used if theyre not worn out. Essentially I need the caged needle bearings, spacer tube, and drawn cups. If someboday had a swing arm bolt as well, I would also buy that.

Keystone Light is my personal cheap beer favorite. Mostly because buying involves going to a Super Walmart inorder to get the 30 pacl that says, "30 Stones," on the side of it. Also, I shall assume you are an engineer if you go to the trouble of using and acronym for carbonated malt beverage.

Anodizing isn't a coating. Anodizing operates on the principle of surface oxidization. THerefore it will enlarge a part, but only by .5 thousandths. Enlargind really is that big deal. For some reason I don't think and unfinished casting can be anodized. I'm pretty sure you would have to finely sand down the outside of youre cases and then align hone the inside bearing journals. Let me know how it goes.

Too late. Maybe you should've told that to his mother?