Mod Banshee

It has good spark yes the air mixture screws are set the same yes I was runing 280 and went to 270 and the plugs are a nice chocolate brown color . And the Clips are in the 3 position should I move them?

I do not have a Balance tube on my Carbs I have 28mm flat side carbs. and the plug wires are on tight. Yes it just started doing this the only thing we did was Race logic Porting. And I had new bearings put on my Crank.

My Shee is not runing Right when it is cold or worm the Left side does not fire but when it gets hot it will fire. And then if you stop riding and let it cool down again the left side will not Fire and we hafe to put in a new set of plugs and go out and get it hot again so it will run right. And the plugs are a Nice Chocolate Brown color

I do not know if it will help but I have 28mm flat side carbs

The Mains are clean.

I want riding on moday and today I go to start it up and it idels fine and low end is fine too but when you go WOT it Runs off one cylinder so I thought it might be the Plugs so I put a new set in and it still does it the Right side plug is white and the Left side is black.

I trail Ride and drag Race

Will the 15/41 Gearing work with 20x11x9 Razr 2 Rear Tires and 21x7x10 Razr Front Tires and all my Mods?

I am Runing 13/41 gearing and I have. FMF Fatty Pipes FMF Power Core 2s Cool Head with 21 cc Domes V- Force Delta 2 Race Logic Porting Vitos Power Pistons 28mm Flat Side Carbs Vitos Degree Key Team Alba Clutch Kit Hinson Clutch Basket Hinson Pressure Plate Hinson Cushions Boost Bottle Pro Flow Kit 6 Air box Vents 270 Main Jets I do alot of trail Riding and Drag Racing with my Banshee. Is this good gearing for my Type of riding?

Best 1 YFZ 450 2 450r 3 Banshee 4 250R 5 Raptor Ugliest 1 DS 650 2 KFX 700 3 Blaster 4 300 ex 5 Tacate 4

Team Alba says there Clutch kit is out a sport Bike

I would get a Cool Head & V-Force Delta 2 & Porting

The T5 are beter for Mod Motors and the T6 are good for Stock Motors. I was told this by Toomey.

I would put in a set of V-Force Delta 2 & a Pro Flow air filter

Yes Hinson does make good Stuff, Like I said I have the Team Alba Clutch kit with the Hinson Clutch Basket and the Hinson Cushions and Hinson Pressure Plate. I would off want full Hinson but it is $900.

Out of these two how does the Best porting for that Banshee? Now I have Race Logic Porting and Next Summer I want to send them out and get them redone.

How is Team Alba & CT racing for Porting Banshees? Now I have the Race Logic Porting but next summer I would like to send them out and have them ported out More.

I like the Team Alba Clutch Kit. That is what I have in my Banshee.

Can anyone tell me how to take out that Rod?

How do you get that rod out of the gear shaft? Do we have to split the motor?

Can anyone help me out with my problem?

The Clutch Push lever that is under the Carbs that the Clutch Cable hooks in to is stuck. How do we get it of the Bike so we can replace it?

Vitos told me Not to run the Super stock Pistond with a Ported Motor.

That is just the motor Mods. It is not even half of my Mods. I am hopeing I will have some Pics of it this weekend to show all off you.

I have them in my Banshee and I like them alot. But they also make V-Force 3 for the sleds they might have them for Quads Too.