white trash

garb bar, bumper, timing plate, and brake lines all sold. bump, and PM me for lower prices

Come on guys I know someone needs some of this. Im hurtin for cash and want these parts gone. Make me an offer and I will likely accept it.

Bumper, grab bar, and timing plate are sold

Word, I was gonna say the same thing.

Nope they are for the 33MM keihins, buy the carbs and pods and I'll cut ya a deal :biggrin:

Polished dog bone - 30 Quicksand motorsports +2 swingarm - 350 billet thumb throttle cover - 25 ASV clutch lever - 50 Vforce 2 reeds - 115 K&N pods with outerwears - 40 Billet gas cap - 40 Stock P/C'd hubs - 50 I also have all the brakes, and SS braided lines, stereing stem, entire stock clutch, front and rear brake pedal / lever ressieies, stock radiator, axle, and some other things not listed or pictured.. Just ask if you need somthing. EDIT - I also have a set of stock jugs that are 20 over with a passion dune port on em, I cooked the ring in the left side and they will need a bore job- 200, look for pics tomorrow brian

After having multiple deals fall through I still have some aftermarket parts left over and some stock ones as well. Below are pics of some of the aftermarket stuff, and a list of some of the other shit as well. All prices are OBO. If using paypal add 3% Keihin 33MM PWK's- 175 Elka's with remote ressies - 500 (these do have some very minor rust that should easily come off with a little work and patience) AC propeg - 175 Renthal Bars - 30 Noss head with 19CC domes - 200 Trail tech bar clamp and computer - 75 DG grab bar - 25 Ac bumper - 25 Adjustable timing plate- 40 boss billet intake - 115

bump

TTT

stator and kicker, and entire bottom end are gone swingarm, clutch cover, tail light, stator cover, and elka's are all gone pending payment

bump.... still a lot of good parts left. All prices are best offer. You see somthing you want and the price is too high let me know I want this stuff gone

a arm's and flywheel are gone

fullbores = sold pipes= sold clutch cover, inserts, impellar, tail light and flywheel gone pending payment by the way, where the fuck is the edit button??????

I am parting out the complete bike so If you need something and I dont have it listed hit me up. I'm just listing up most of the aftermarket stuff but if you need anything else like I said just let me know. I accept paypal and money order. If using paypal add fees. I do not have it tore down yet but will start to do so tonight after work and get some pics. If you want pics of a specific part that I dont have listed again let me know. eveything is coming of of this bike stock jugs 20 over with passion dine port- 400 Noss head with 19cc domes- 200 lightened flywheel- 75 adjustable timing plate-40 trued and welded crank (stock)- 150 keihin PWK 33's with K&N pods and a bunch of jets- 325 boss billet intake- 150 vforce 2 reeds- 130 Silver fullbore plastic- 200 quicksand motorsports +2+1 arms with flame gusset-300 Quicksand motorsports +2 swingarm w/ roundhouse carrier- 350 shearer inframes- 300 ac pro peg nerfs- 175 ac bumper- 30 dg grab bar- 20 polished clutch cover with billet impellar and billet insert, and billet water pump cover-100 renthal bars-35 6 led billet tail light- 20 cascade stator cover (missing sprocket cover)-130 powder coated hubs- 40 a pair or 75 for all 4 +2inch steel braided brake lines all aournd-100 flame e brake block off- 20 flame master cylinder cover (front)- 15 billet rear brake resivour- 50 elka's with remote ressies- 500 (these do have some very minor rist that should easily come off witha little work and patience) stock rear shock with white spring- 125 stock axle, straight as an arrow looks like shit- 50 polished dogbone- 25 billet throttle cover-20

hey I have a Jap car... nothing special as of yet, just a soon to be sleeper sedan. Over the winter its getting twin turbos and should put a touch over 400 to the pavement

Yea im sure I would however I dont want to deal with all the BS that comes with parting it out. If it doesnt sell in the next month or so I might do that... or I may keep it.

TTT

3500 obo

$3700???

Only thing wrong with it is the fucked up part on the rear plastic that I mentioned, and I recently converted to a twist and the cable is a tad too long (BTW if the concerns anyone I still have the thumb) other than that shee is ready to be fired up and riden off.

Come on guys... No one is is so much as even interested in this thing? I will work with you on the price... If 4K is to much make an offer

ttt

AS much as I hate to do it I am going to sell my 02. This thing is nice and I always took real good care of it. So hereis what is done 2002 banshee Passion dune port on stock jugs 20 over cool head with 19cc dome's lightened flywheel +4 timing trued and welded crank PWK 33's boss billet intake V force 2's fullbores (the left pipe did hit the back plastic and ucfk it up a bit about a quarter size spot.. can get a pic if needed) elka's with remotes up front quicksand +2+1 a arms (Black with red sticker) quicksand +2 swinger (black with red sticker) sheerer inframes k&n pods with outerwear a/c propeg nerfs a/c front bumper dg grab bar polished clutch cover renthal bars trail tech lights 6 LED billet tail light asv clutch lever cascade stator cover powdercoated frame and hubs steel braided brake lines. I just put on a twist but still have the thumb trail tech with bar clamp (not hooked up but comes with all parts) billet everywhere I.E front master cylinder cover. back brake resivour, thumb thrttle cap, E brake block off,clutch cover insert, and water pump cover Also comes with 20" 8 paddle haulers for the rear and some fronts as well (cant think of the make right now) this thing looks good and moves just as well. Always has been a stong runner. I'm sure there are some other things that I forgot to mention but I think I got the gist of it all Located in Machesney park Illinois which is about an hour west of chicago. Comes with title. Looking to get $4000 OBO. Any reasonable offer will be considered. Feel free to Pm me here of e-mail at gimmeabeer23@comcast.net

Badgers and the bears! its so nice Finally being able to be proud of being a bear fan

Well if its running like its supposed to be, I call her "quick silver" If its screwing up she usually gets called various names, including some of the following... "motherfucker, 300lbs of scrap material, soon to get sold peice of shit,etc etc etc..." but then i feel bad and have to apologize to her for saying the mean things