sanddragon2004

got a set of black rec arms with ball joints +2+1 built for yfz450 shocks. asking 385shipped to the lower 48 states. brand new never used in the box.

Here is our super light spindle. they work with 1/2" 20 threaded heims upper and lower. weight is 18.75oz per spindle. we have them in 4 configurations. with or with out brake mounts. and spindle mount, or standard hub. available for banshee (shown), yfz450, 250r, and 450r. introductory price of 189.99. +9.99 shipping. set shown for 169.99 (grey powder)

You have a PM.

Dawarrior man, what the heck happened to the a arms in your avatar???? got a bigger pic?

how do you figure? you dont move the shock out when you move to a plus 2 a arm. shock mount location is the same on standard a arms and +2 a arms.

got a used ultracross setup +2+1 BLACK POWDER COAT USED 1 TIME FOR 400 RETAIL is 649. lifetime warranty.

sounds good, i have 20 sets of each, stock geometry and -2+2forward. call me anytime.

PICS

I have 2 complete sets of shocks for the 05 yfz450. these are in very good condition with about 6 months of riding on them. front and rear shocks. id like to get 200 for the fronts each set, and 100 for the rear. they are all in great condition no leaks not abused good shocks. I will post pics this afternoon.

Matt, I have the ball joints for rec arms that are prob similar to the ones janssen sells, I would need a pic of yours to make sure its the same. Price is 20.00each.

I can get you replacement ball joints for those arms.

Ok hot off the press, Sanddragon Motorsports Complete drag front ends. spindles way .75lbs on banshee arms are 5lbs complete for all 4 arms! i have them both as you see it, or with out the heim jointed tie rod ends for steering. shave some weight, get them all from the same source! I have these for the banshee, 250r, yfz450, and trx450r. The YFZ ones will have the bend in the arms like the oem arms. will have baby gussets on them! Heres some pics of the front end all bolted together! O ya, got them with / with out brake mounts, without as shown. O also have these for normal hubs, or spindle mounts! Spindles will fit custom creations, yakki racing, RIS, or anybody else using a 1/2" heim jointed ball joint. Call or email us today!!! 408-833-4131. or our 1-800 order line price w/o heim joint rod ends 515.99 Price as shown. 549.99 1-800-615-6520 Thanks guys happy halloween!!!

Per my catalogs and in speaking with elka, they do not make a banshee shock with a triple rate spring for stock or extended a arms unless you go long travel.

because banshee shocks are so much shorter, you dont really gain much plus the spring options available today dont allow triples to fit. he wanted a arms built to fit his banshee, he had shocks from a 450. So we built them to fit the 450 shocks since 450 shocks are longer, they allow you to run a triple spring shock. Not sure how much of an advantage you have over banshee shock of the same type, but im sure Ruko can give us his thoughts on how it performs? I have run this same setup on my banshee with 05 yfz shocks and it was about the most plush ride i have ever exp on a banshee. So i would imagine with custom built elkas would be even better. again, perhaps Ruko can enligthen us as to how it performs?????

Are those triple rate Elkas on their?

I have always wondered how that chassis setup performs. I bet with the right rear shock setup it would fly over woops like they wherent even their! Dave moore, is a fregin wizard fabricator.

Here is my Long Travel banshee, not as much as that one, but man it sure rides cush!

glad to hear! post some pics up here so we can see them! make sure and find 06 450 shocks they are supposed to be more plush riding then the 04/05s

aaah a dean sundahl chassis! the best of the best! I think they want 10k$ for that setup! what a killer looking setup it is though!

Not longer, just better valving, makes them super duper ultra plush!

Just like the Ad says. I have a set of Elka Dune Series shocks for banshee, they are double rate ride height adjustable shocks. they are valved for 145-150lb rider. They have 1 hr on them. Brand new, perfect condition nothing wrong with them, Rider is mx racer, and needs the cash for her LT yfz450 so selling parts of the banshee. 300shipped to the lower 48 states. email or call us 408 833 4131 thanks for looking. . PS will post pics this evening.

We are currently looking for asphault drag racers to help us expand to the southeast, and midwest. IF you are intersted in sponsorship opportunities please send emails to [email protected] we currently are looking for serious racers that plan to compete in all the different series for the 2006 season, Also looking for ICE racers as well. Please contact us with resumes, and photos of the bikes in question. Thanks in advance for your responses.

Not a problem race a holic. Keep your eyes peeled guys we might be having a christmas special on all our stuff around tky day.

U sure they are lonestar? They are usually spot on with their geometry. I have never seen anything LSR come to me not 100% personally. otherwise yes def check out the camber caster adjustment I usually start mine all the way in, and back them out a few turns and go from their.

Id go with the burgards.