-
Posts
2,915 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Wallrat
-
for just the wheel you only need to remove the 4 14mm nuts. That big nut with the cotterpin holds the hubs on.
-
Yes they are. I'd rather be dumped for another girl than another guy. At least you get something for the spank bank. Trick is not to ask to join, offer to photograph em
-
I've got an MP stinger pipe on my rustler. I know they make one for the tmaxx now as well - same engine. Great pipe, loud as hell, tons of low-end and best of all, no exhaust gunk all over your car.
-
Done it? I forgot to put it in gear and my wife almost rolled out of the trailer while straddling the seat on all 4's!
-
Boost bottle would be of better use shoving up your bottom end. Check out a 2:1 pipe and/or a single carb setup.
-
Read the instructions, try their website. If all else fails, see if you can find a board or ask the stealership.
-
Wow, finally just checked out this thread. Ok I skipped thru about 60% of everything that was said but I thought I'd share some info I gained from a kayak of all places. Some folks came out with this kayak that had this patch on the bottom that was covered in textured "X's". Of course this makes no sense to me cuz its right where you want to have low friction in order to do spins - glossy smooth is obviously better. So I see this video explaining the R&D they did using a bowling ball dropped into a tank of water. 2 bowling balls are dropped, one has had X's ground into its surface and the other is just your regular old bowling ball. If I hadn't seen it I wouldn't believe it, the damn textured bowling ball slid thru the water faster than the smooth one. The X's caused little air pockets to form around the ball and so the adhesive properties of the water weren't able to cause as much friction. Not exactly the same scenario, but hey, it does raise the question as to which type of surface actually does decrease friction. Since gasses behave like fluids, I would think it would have the same effect. The rougher surface would cause a layer of turbulance on the immediate surface and allow the incoming air stream to flow with less friction. Oh and the kayak - it spun like somebody from the 909!
-
It definately makes a difference but any changes made to the intake/exhaust will require a rejet. Also its usually a good idea to take a look at the intake at the same time you're changing the exhaust, stock systems are usually fairly restrictive on both sides of the equation. When I slapped a Big Gun Race pipe on my wife's 300ex I had to go up 5 jet sizes, when I removed the airbox lid, I had to go up another 4. That thing couldn't get into 3rd on a decent incline with me on it, now I can pull 4th no problem. -Just reread your post. If you changed the pipe and not the jetting, DON'T RIDE THE DAMN THING! Serious engine damage can occur since you now have more air with the same amount of fuel. You're running lean my friend. Pull out your plug and take a look. It should be cinnamon brown. If its white, your well on your way to destroying that bike. Increase the jetting as per the pipe manufacturers recomendation for a start.
-
Ranshee is correct, unless the accident causes the initial vehicles to enter other lanes such as in Mcaf's case (by the sound of it anyway). For same lane accidents, it doesn't matter what happened in front of you, if you hit her, then you were either following too close or you weren't paying attention - either way you're at fault for the damages caused when your vehicle hit her's.
-
I've raced a few piped/filter/jetted 450's against my mostly stock shee and haven't lost yet. For a 4stroke, its a nice ride.
-
Just thought I'd chime in, these are some GREAT tires! I'm running the same thing on mine and absolutely love them. I think I paid $205 on blue labels so the price is good too.
-
Engine Enamel my friend. Tons of colors and the most durable spray paint I've ever used. I painted my frame with it recently and its holding up great! Its about $6/can for the high temp at your local auto parts store.
-
Semi-gloss black. I figured that gloss might chip.
-
Actually boss, you're partially at fault. She's responsible for the damage to the parked car, and you're responsible for the damage to the rear of her car as well as any damage to your own. That's the way the law/insurance looks at it anyway.
-
Ignore her. Let her do her thing with the 6th grader, and you go do your thing with Becca or some other girl. You're 13, not like you're looking for somebody to marry, just have fun and don't do anything stupid. Who knows, you two may hook up one day.
-
So WhiteBros, are you actually attracted to women you aren't related to??? If so then welcome to the HQ, glad to see you escaped bluetraxx brotha'.
-
I think Chase has a point but is just ruffling some feathers because of his blanket statements. There has been an increase lately in worthless posts talking shit about the HQ, or asking questions that have been covered 80,000 times already. But hey, that's just to be expected. People new to the site don't neccesarily know that the search function is there. They see people asking jetting questions and getting answers, so they do the same. I disagree with Chase on 2 points. First, the site hasn't gone completely to shit. Ask an intelligent question, and you'll still get your answer, same as always. Second, we want the people banned by bluetraxx, its the folks that are accepted and loved at bluetraxx that we could do without. I welcome the free thinkers.
-
Everytime his mom looks at him she's probably regretting that she said "no" to the butt love that night.
-
I used engine enamel on my frame and arms and haven't had any wear yet after 6 or 7 dune trips.
-
Went out to my car today to go surfing before work and found that some f_ck keyed my car 6 times down to the metal! I have an idea of who it might be but still there's no way I could prove it unless the piece of shit does it again. If I ever catch who did it, I'm gonna be displaying his kneecaps from my rearview mirror.
-
If you guys are looking for a challenge on X-2 try going through all 99 levels of the Via Purifico under bevelle in the last chapter. Every enemy in the game is down there in increasing difficulty. Actually, most of the enemies including the weapons are pretty easy if your stats are maxed out. That all changes on level 99 when you meet Trema. This guy handed me my ass about 250 times before I finally got lucky enough to beat him. Easiest way to do it is to get the cat nip accesory on level 1 which makes its user deal 9999 damage on every hit when they're HP are yellow. Give that to a gunner and use the trigger happy command to take down 9999 for each shot. Still, even with this, its really tough to beat him. Easily the hardest battle I've fought on any FF. Here's his stats: HP 999999 MP 999 Str 255 Def 255 agl 128 eva 99 mag 255 mag def 255 Oh and BenBB...yes, moogles are still around. You actually dress up as one in FFX-2.
-
7 rocked, 8 was the shiz, 9 blew donkey balls, 10 was okay...some cool characters and f'n great ways to increase your characters' stats but the ending sucked, X-2 was pretty good...better ending but kinda cheesy and they seriously limited how much ass you could kick. So here's a good question, who is everyone's favorite FF character? Least fav. character? mine: fav: auron - this dude just kicks everyone's ass least: Seymour - how big a fruitcake was this cock smoker?? By about the 18th time he said that so n' so's "resolve was admirable" I was ready to beat that blue-headed felcher with a tire iron.
-
You gotta have a hose attached to the bleeder or it'll never work. Everytime you let off the brakes, air gets sucked back in. So find some tubing at least 12" long that will fit on the bleeder nipple - I personally like using tygon tubing since its clear and very cheap. Run the other end into a bucket or similar disposal area. Then pour some fluid in the reservoir and start pumping the brakes with the reservoir cover OFF. Don't let the reservoir go empty or you'll have to start all over. As soon as you've got straight brake fluid and no air bubbles coming out the tube tighten up the bleeder with the hose still attached - you're done. Do for both sides then fill up the reservoir and put the cover back on. Takes 10 min tops.
-
I've got the week off and was thinking of a midweek trip up to pismo. I'm in Redondo Beach (near LAX) so if you don't wanna drive all the way to pismo, you could drive here and then we'll put your bike in my trailer. Probably just 1-2 nights and gotta be back on thursday. PM me if you're interested.
-
It was okay at best. Ya lots of stuff blows up but its kinda long and cheesy. Both Xmen movies were better. Hulk just blew, spiderman was okay - just had annoying actors. Punisher does have some decent acting, which is nice. But the story is very predictable and goes nowhere fast. Its only a 2 hour movie but feels more like 5. See Kill Bill Vol2 first.

