01bansheefox

I need a ready to use rear master cylinder for my brakes. Wanted to check here first before I give my money to someone on eBay. Pm or reply ASAP, thx

A bit steep for me, early 2000 frames sell for $250 shipped on eBay, thanks though

You think they sound that different? The dynoport has a slight higher pitch i think but kinda in the same boat. If you go on youtube and look up the Dynoport and DMC 916 they are the only 2 pipes that compare.

What do you have??

That's what I thought but in reply to the guy who said it was the pipe i was just curious why he thought that when the dmc 916 has the sound we are trying to acquire and it has dual pipes.

Gloss red? Fresh? Pics?titled?

Complete set in excellent condition, ready to use! chrome in great shape, has some blueing at beginning of head pipe other wise over all condition 8.5/10.... $325 shipped lower 48 @ that price. Send email or phone # for pics.

I will do $1600 if you meet half way?? Im from sacramento.

I just bought a banshee in Nevada at 4800ft and it was dialed in pretty good it had stock carbs, Toomey T6' pro flow 1 in to 2 filter with a WB boost bottle Its on 3rd clip, 25 pilot and 250 mains, air screw is 1.5 turns out

Both carbs are setup the same.. The right cylinder pops quite a bit only when cold, once its warmed up it stops. They are a bit lean as i bought the quad 4000ft above my current level so tomorrow im going to richen them out a bit, i am just curious why only when its cold and why only 1 side? No air leaks.... Toomey T6's 1 into 2 air filter exposed no box Stock carbs... 3rd clip, 25 pilot, 250mains think im gonna try 27.5 pilot with 300 mains... Any other thoughts??

How about my T6's plus $50, you can always resell my pipes for $300+ Or just hold onto the pipes a few more days for me i can try to sell my T6's then just give you the $$...

Are you paying for shipping on the motor?? I will buy you brand new +2 +1 a-arms for your motor, we each pay shipping.

Whats paypal addy

I want the quad but not the motor, trying to see what I will be into it with the motor sold.

Thats all? I figured aleast $1500... The billit cover on the side is worth $300 alone. It has been inspected the cylinders are fine, the piston has a pin hole size in it.

damn ok i will pass on it then

Has a 4mil weisco crank and needs right side piston replaced, it lost compression. looking for ball park $$ figure.

Spray paint will flake and not last... But i once painted a frame using a professional automotive spray gun with an air compressor with about 4 to 5 coats and that held up not to bad. Use an actual gun vs rattle can if you can and it should hold up good if sanded and proper steps were taken.

No frame?

$$? Year? Title?

I see they have a case splitter/separator and a crank puller?? Need those to im guessing? I just want to have everything on hand so when the time comes i dont have to wait for shipping.

Non cracked and damaged fullbore fenders, need white in color front only.

Clutch holder, is that the tool i see if i type in banshee clutch tool on ebay??

Like the title says, ISO stock banshee frame not J A-Arm... Located in or very close to CA.. dont want to pay shipping charges.