01bansheefox

Im starting to wish it was for a banshee.... I cant seem to sell this thing, I dont think im asking to much for a $2,000 frame.

Anyone else?? This guy is trying to sell me an 1989 banshee with a-arms and no conversion has been made, but he has no paper work on it.

Did the J-arms only come on the 87 and 88 models? 1989-2006 use A-arms??

California Shipping I think is $70 or so if that.... I have never shipped a frame before.

No clue my buddy races 250's and he had this in his garage after he bought a new frame so i snagged this one but lost interest in making a 250. Must be nice to have $$ he just went out and bought a new one.

Looking for a nice powdercoated banshee frame with papers + $$ Check out my post in the For Sale section for more information.

This is a 98' lonestar mx frame.only weighs 40lbs. with sub frame. Has steering stem bearing with seal. Back motor mount bracket needs to be rewelded, I have the broken piece.also needs some welding repair on guset and frame by the swing arm piviot bolt.frame is straight and has nice powder coat. Any decent welder can fix this, its very simple, and you can have a great aftermarket frame for cheap.this frame is set up for standard link or no link swing arm and pro peg nerf bars, these go for $2300.00 new, I would like to get $550 + shipping or a nice powdercoated banshee frame with papers +200. Here are some pictures.....

Just wanting a new project, I don't care if its in pieces or just a chassis with wheels, I'm up for anything in California that doesn't require shipping. Thanks

this is a 98' lonestar mx frame.only weighs 40lbs. with sub frame.has all rubber garmets and steering stem bearing and seal.back motor mount bracket need rewelded,i have the broke peice.also needs some welding repair on guset and frame by the swing arm piviot bolt.frame is straight and has nice powder coat.i bought another frame i don't need two.ant good welder can fix this one and you can had a great aftermarket frame for cheap.this frame is set up for standard link or no link swing arm and pro peg nerf bars.these go for $2300.00 new,i'll sell for $550.00 + shipping.

250 is totally differnt i think in jetting

I do not know about the pilot and needle, im not that adv this is actually my first time doing my own jetting, I just took out the bottom of the carb and I see the main jet which reads 360, do I need to pull apart more of the carb to get to the needle & pilot?

2001 CR 125 ALL stock except Pro Circuit Pipes it has a 360 main jet and its running WAY rich... I went to the pro circuit web site and it said to run a 430 main. Isnt that going bigger?? I need to lean this bike out, it fouls plug every 30min. SORRY THIS IS NO BANSHEE

Would the inframe and out of frame have the same pipe design? I had a set of inframe Power Pro pipes and looked nothing like that... My inframe were a top end pipe and really big, i had to cut my front fenders.

Looking for something as a project bike..... I can throw in a 2001 CR 125 if the deal is good......... Im in N.Cali

The engine is all stock??? Intake?Carbs?Port job?

I does have a brake light at the rear. I do not recall any silver on the banshee but then again maybe I just never noticed it.

Looking at a banshee but it has no paper work fenders are all white with a black seat. and i think a black radiator? This the 2002 colors?

I knew it was fake because i told the guy to give me his information so i could send him the $$$ and he kept insisting to use Western Union only.

I do craigslist a few times a day about 6 differnt cities. I just picked up a cycle trader and I didnt see 1 banshee under $3,500 and with the atvtraderonline.com lol thats even worse there are some banshee's up to $18,000 on there. Im in Nor Cal also, where abouts are you located? Im 40min north of sacramento.

I dont think i have ever seen an atv trader, only thing we have here are Auto Trader and Boat Trader and i think there is Classic Trader....... If i look in the paper anything 1995 and older goes for under $3,000 There was a stock 93 for $3300 and a few 2004's for $4500 stock. I will try to get an atv trader, thanks.

Yes or no on this deal........ First of all i live in Ca so banshee's are worth alot more than ones back east keep in mind. 2002 Banshee Pro Circuit Pipes Veforce Reeds K&N Jetted Fly Handle Bars Everything else is stock and the rear tires could be changed out they, are pretty bald. $3000 Has maybe 20-30 hours on the whole machine, it has been in storage for the past 1/2 year.

Well i see frames go left and right on ebay powder coated and not for under $400......... Anyway the price wasnt really the point its that the buy it now was only $500 and people are still biding $120 more than that when they could of just bought it already.

$1200??? it seems you have alot wrong with it.............

Well i threw $2200 out there as an option i would pay for 1/2 the shipping is what i said. But its ok i will look else where. A banshee will run anywhere from 375-475 for shipping.

Ok Minkia is selling a 2001 frame and has it listed as Buy it now for $500, people are still bidding on it, and its up to $620 or something and then still $100 for shipping so someone is going to pay $720-$750 for a bare 2001 frame. http://cgi.ebay.com/ebaymotors/Banshee-200...sspagenameZWDVW