Leaderboard

There are many good exhaust choices depending on your setup and your goals. Post your setup and maybe someone will help you pick one out. Alternatively call a site sponsor and they will be able to steer you in the right direction. You could also go to the dyno section and look at some graphs to help decide.

The last thing you want on an mx bike is wheel spacers. Sent from my iPhone using Tapatalk

HaHa, I expected that more from Burke!

Since your basically starting from scratch, You'll need: cylinders pistons 4mil crank, welded as well as new bearings Port match the cases 35 pwks filters billet basket fast clutch pipes billet water impeller Cool head with domes cut for the 4mil and your setup. ie race, pump or alky I'd recomend a lockout and if your going to run a lockout, you'll need a cover unless your run a gigot. Pancake bearing Gaskets and an oring kit We just got done putting together a fast 4mil with all the above mentioned, was well as a duneable 1-5 and it freakin rips. The power curve on this thing is insane. We run the original set of Rockets on it as well. One thing I've learned over the years of fuckin around with these banshees is that you cant short cut anything. If your going to do it, don't half ass it. You'll save money in the long run. Any of the older guys will tell you the same.