Two_Stroke_for_Life Posted October 17, 2018 Report Share Posted October 17, 2018 Looking for a chassis builder who can make me a stock geometry chassis. That has all the provisions for full fenders with all the factory mounts and hookups and made from chrome moly. Thanks in advance!!! Quote Link to comment Share on other sites More sharing options...
specialblend07 Posted October 17, 2018 Report Share Posted October 17, 2018 57 minutes ago, Two_Stroke_for_Life said: Looking for a chassis builder who can make me a stock geometry chassis. That has all the provisions for full fenders with all the factory mounts and hookups and made from chrome moly. Thanks in advance!!! 1) What's your budget 2) Good luck finding someone to build you a SUSPENDED frame. If you're looking for a drag frame, HOD, Turbo Chassis, GT. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 17, 2018 Report Share Posted October 17, 2018 Probably $6,000+. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 19, 2018 Report Share Posted October 19, 2018 Most guys do drag only type stuff. But there are a few folks out there. Be prepared spend a decent chunk of change when you do find someone willing to do one. Maybe buy a Turbo Chassis look alike and finish all the mounts and stuff your self. Or just Hawkeye the for sale pages till an outlaw, eliminator, or LSR stock style pops up. There are a ton of guys who will modify a stock frame though as well. But a good one still gets up around 3k plus swing arm, a arms, and all the hardware. So there’s a few options for sure. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.