OKCterror Posted August 13, 2008 Report Share Posted August 13, 2008 I have some minor motor work done to my banshee but i was wondering what are some cheap things to do that gain reasonable torque or hp. Anything form diff mixs to timing or whatever else. Quote Link to comment Share on other sites More sharing options...
stink989 Posted August 13, 2008 Report Share Posted August 13, 2008 try a boost bottle joking :biggrin: Quote Link to comment Share on other sites More sharing options...
wittle350 Posted August 13, 2008 Report Share Posted August 13, 2008 (edited) try a boost bottle joking :biggrin: :laugh: good one I think a really good set of reeds would do wonders, but might want to ask around to find out what would best suit you. I run Boysen Power reeds Edited August 13, 2008 by wittle350 Quote Link to comment Share on other sites More sharing options...
1qwkgoat Posted August 13, 2008 Report Share Posted August 13, 2008 More timing if your is stock timing. I could feel the difference from stock to +4 on mine. More compression will also get you some power. Just make sure you are running good enough fuel for this. Quote Link to comment Share on other sites More sharing options...
captain_ron80 Posted August 13, 2008 Report Share Posted August 13, 2008 I have some minor motor work done to my banshee but i was wondering what are some cheap things to do that gain reasonable torque or hp. Anything form diff mixs to timing or whatever else. Have a machine shop mill your stock head .020. This will raise your compression and you'll still be able to run 92 or 93 octane. It's a decent gain for the money. Ron Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted August 13, 2008 Report Share Posted August 13, 2008 Have a machine shop mill your stock head .020. This will raise your compression and you'll still be able to run 92 or 93 octane. It's a decent gain for the money. Ron shave it .030". its still plenty safe for 92 octane. Quote Link to comment Share on other sites More sharing options...
OKCterror Posted August 13, 2008 Author Report Share Posted August 13, 2008 if i have the head milled and swap reeds then kick it up on the octane level will that all work together to produce a signigant power gain. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.