bigboybanshee Posted August 6, 2008 Report Posted August 6, 2008 I have a set of 4mil cub cylinders, fully ported from F.A.S.T. Racing that I am selling, they're polished by cascade too, but they need to be re-plated. I forgot to turn my fuel on one pass and ate a plug and it scored one side pretty good. Millenium should be able to fix it up no problem. Polish job can be saved too, just be sure to put a note in the box asking them not to blast the cylinders after plating. I ran a best of 4.13 on them, backed up with a .15, 17, and .19 - I weigh 300lbs and have been the only one to ride it. I'm sure it'll run low 4.00's if not 3.90's with a light rider. I also have several folks that'll vouch for these cylinders' performance I'll take some pics tonight and post them up, asking $550 shipped to anywhere in the continental U.S. Thanks! Travis Quote
bigdaddy69 Posted August 7, 2008 Report Posted August 7, 2008 Whats it cost to have them re plated? Quote
NYUK Posted August 7, 2008 Report Posted August 7, 2008 yooooooooooooooooooo mr. merrill. where you been?updates.outgrew us? Quote
bigboybanshee Posted August 7, 2008 Author Report Posted August 7, 2008 Been out of work for a few months, working on drag bike constantly, trying to race every weekend, got my first baby on the way, life has been crazy for a while. Plating usually runs around 300 bucks. Thanks! Travis Quote
bigboybanshee Posted August 8, 2008 Author Report Posted August 8, 2008 Pics Damage on the right cylinder, this the only thing wrong with them. Quote
docjcwatson Posted August 8, 2008 Report Posted August 8, 2008 Wow those are sexy. I have been putting some serious thought into sending my motor to Cascade to get it polished like that. Damn they do a hell of a job! Good luck with the sale bro. Quote
bigboybanshee Posted August 8, 2008 Author Report Posted August 8, 2008 Thanks! Cascade's polishing is reasonably priced too, I highly recommend them. Quote
flyhighprerunner Posted August 8, 2008 Report Posted August 8, 2008 Why send your cylinders to cascade when you can buy these for so cheap, I cant believe there not gone yet. Now Travis is making me wonder..... Quote
BB3 Posted August 8, 2008 Report Posted August 8, 2008 If i had the $ they would have already been mine. Quote
bigboybanshee Posted August 8, 2008 Author Report Posted August 8, 2008 Why send your cylinders to cascade when you can buy these for so cheap, I cant believe there not gone yet. Now Travis is making me wonder..... Thanks! I was wondering that too, I figure $550 shipped would almost be a steal, plating isn't that big of a deal, just needs to be done. Cub cylinders are what, about $850, new, untouched out of the box. $400+ dollars in portwork, $200 polish job, that's $1,450 to buy the same setup new, then wait 8 months for porting, 2 weeks for polishing...or you could pick these up, spend 300 bucks, wait a month for plating and have a hard running setup for the price you'd pay for just the cub cylinder untouched. Come on folks, someone snag these up, I take paypal and money orders :thumbsup: Quote
Hilarious Posted August 8, 2008 Report Posted August 8, 2008 Come on folks, someone snag these up, I take paypal and money orders :thumbsup: what else you take in form of payment? i still have watermelons in the field. Quote
bigboybanshee Posted August 8, 2008 Author Report Posted August 8, 2008 what else you take in form of payment?i still have watermelons in the field. How much do you sell the watermelons for? Got any piahhps? Quote
flyhighprerunner Posted August 8, 2008 Report Posted August 8, 2008 Thank God I was getting worried that i was going to have to buy these!!! Quote
locogato11283 Posted August 8, 2008 Report Posted August 8, 2008 good fuckin deal right there.. how you been travis? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.