peterlocal22 Posted August 1, 2008 Report Posted August 1, 2008 ok guys ive been looking at LSR aluminum sprockets, and brake hubs. I noticed a company who makes the same parts, look the same but are quite a bit cheaper. are Boss aluminum parts the same thing as LSR or are they not as good? thanks Quote
shanYE west Posted August 2, 2008 Report Posted August 2, 2008 I'd run the Boss.. LSR is good stuff but your paying for the name and the reputation. I havn't had any problems with my Boss stuff yet. Quote
jbooker82 Posted August 3, 2008 Report Posted August 3, 2008 Wich ever one you go with I would make sure it has a steel spline insert. I cant imagine aluminum splines on a steel axle would last long. Quote
BlntdEyez Posted August 3, 2008 Report Posted August 3, 2008 can someone post a link to the boss website Quote
lilmegill727 Posted August 5, 2008 Report Posted August 5, 2008 http://www.bossatvracing.com/index.php?mai...t3rte79f5v8g8q6 Quote
dajogejr Posted August 5, 2008 Report Posted August 5, 2008 Peter.. When you're ready to buy, PM me. I will beat all the pricing on the BOSS website considerably... DJ Quote
MarineNYC Posted August 5, 2008 Report Posted August 5, 2008 Peter..When you're ready to buy, PM me. I will beat all the pricing on the BOSS website considerably... DJ Do you offer similar products? Quote
dajogejr Posted August 5, 2008 Report Posted August 5, 2008 Do you offer similar products? PM Me what you're looking for. Quote
TeamRealtreeHD Posted August 5, 2008 Report Posted August 5, 2008 Boss Racing Products are top notch... Quote
Bansh-eman Posted August 5, 2008 Report Posted August 5, 2008 Boss Racing Products are top notch... I have had three problems (two with one item) with three of the products I got from them. They need better quality control. Quote
TeamRealtreeHD Posted August 5, 2008 Report Posted August 5, 2008 Their intakes with the crossover tube is awesome. And I saw a 30% aftermarket radiator over the weekend made by Boss and it was pretty cool. Quote
dajogejr Posted August 6, 2008 Report Posted August 6, 2008 I have had three problems (two with one item) with three of the products I got from them. They need better quality control. Explain please....and are these items you got from me? Quote
Bansh-eman Posted August 6, 2008 Report Posted August 6, 2008 Explain please....and are these items you got from me? the one issue you already know about, the wheels didnt get debured and when they installed the valve stems they had cuts that allowed them to leak. the carrier has the tube inside, it wouldnt move to allow the axle to install. I had to pry the thing out of the way so i could put the axle on backwards so it would force the tube into place and then install the axle as it should have been Quote
dajogejr Posted August 6, 2008 Report Posted August 6, 2008 the one issue you already know about, the wheels didnt get debured and when they installed the valve stems they had cuts that allowed them to leak. the carrier has the tube inside, it wouldnt move to allow the axle to install. I had to pry the thing out of the way so i could put the axle on backwards so it would force the tube into place and then install the axle as it should have been No...I didn't know you had to debur the rims for the valve stem. My spindle mounts are ok, BBII's are ok... So you have to move the spacer/roll tube to put the axle in a carrier...ok... What's the third? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.