bronco91shee Posted June 24, 2008 Report Posted June 24, 2008 I DONT AHVE THE BOOK AROUND, BUT I WANT TO CHANGE THE OIL IN THE SHEE BEFORE I RIDE AGAIN. WAHT TYPE AND VISCOSITY DO YOU GUYS RECCOMEND AND HOW MUCH? IT IS STILL THE STOCK CLUTCH AND SETUP. NOTHING FANCY... THANKS Quote
714banshee380 Posted June 24, 2008 Report Posted June 24, 2008 i believe it holds 1.6 quarts... and i run 85 weight gear oil some people use automatic tranny fluid. some people use 10w-40 its all personal preference i guess Quote
jamebo Posted June 24, 2008 Report Posted June 24, 2008 I DONT AHVE THE BOOK AROUND, BUT I WANT TO CHANGE THE OIL IN THE SHEE BEFORE I RIDE AGAIN. WAHT TYPE AND VISCOSITY DO YOU GUYS RECCOMEND AND HOW MUCH? IT IS STILL THE STOCK CLUTCH AND SETUP. NOTHING FANCY...THANKS The manual calls for Yamalube 4 (10W30) or SAE 10W30 API service SE, SF, SG type or higher. I run the Yamalube 4, 10W30. Quote
okbeast Posted June 24, 2008 Report Posted June 24, 2008 Holds 1.8qts. I run type F, atf, and yes it is a preference thing. Quote
Washburn Posted June 24, 2008 Report Posted June 24, 2008 It says 1.6 in Clymers so what I do is buy 3 quarts of Motorex fully synthetic 10w30 and I get 2 oil changes with the three bottles. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.