arfountain Posted June 13, 2008 Report Share Posted June 13, 2008 How the hell do I this bitch off, my motor is out, and i can't get that damn center bolt out. The 32 mm one. What should I grab onto without breaking something else to crack it loose. Unfortunetly I don't have an impact at my house. Any idea???? Quote Link to comment Share on other sites More sharing options...
BenBB Posted June 13, 2008 Report Share Posted June 13, 2008 Try a penny or a rag between the crank drive gear and the clutch basket driven gear... Quote Link to comment Share on other sites More sharing options...
endofitall9 Posted June 13, 2008 Report Share Posted June 13, 2008 I just put an impact on it give it a couple of taps and off it comes..no need to hold anything..the impact does the trick... Quote Link to comment Share on other sites More sharing options...
NYUK Posted June 13, 2008 Report Share Posted June 13, 2008 wrap a leather belt around the inner clutch hub, carefull not to take the ears off your basket. then crank on it while someone holds the belt. Quote Link to comment Share on other sites More sharing options...
shee4speed Posted June 13, 2008 Report Share Posted June 13, 2008 (edited) Your gonna want one of these to make life easy on ya.I've never tried any other tecniques. oh,sorry.just saw the other thread. :biggrin: Edited June 13, 2008 by shee4speed Quote Link to comment Share on other sites More sharing options...
Toomey Banshee Posted June 13, 2008 Report Share Posted June 13, 2008 Go to an auto store and get yourself a strap wrench if you dont have access to a air gun/compressor. The air gun is the trick though. Quote Link to comment Share on other sites More sharing options...
gemini Posted June 13, 2008 Report Share Posted June 13, 2008 if you dont want to spend the 30 bux on the clutch holding tool and you have an old set of fibers/steels laying around that are burned up or something you can make one. get one fiber and one steel, drill a hole through each of them and bolt them together (2 will do just fine) you can use this to keep the inner hub from spinning, but the motor will still spin so you still have to do something about that. i've made one and never had any problems with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.