kwickez Posted May 31, 2008 Report Posted May 31, 2008 my rear brake pedal is so high that its ripping into the clutch cover.the master cylinder has been rebuilt,the brakes are worn but not done.and if there was a pin hole leak in the line wouldnt it squirt brake fuid atleast alittle. every month i have to bleed the brakes to get pressure back to the pedal.i dont notice any brake fluid puddles either.please somebody help me figure this out. Quote
FireHead Posted May 31, 2008 Report Posted May 31, 2008 my rear brake pedal is so high that its ripping into the clutch cover.the master cylinder has been rebuilt,the brakes are worn but not done.and if there was a pin hole leak in the line wouldnt it squirt brake fuid atleast alittle.every month i have to bleed the brakes to get pressure back to the pedal.i dont notice any brake fluid puddles either.please somebody help me figure this out. Do you know there is a pedal height adjustment tie rode between the pedal and master cylinder? :ermm: Quote
BellicoseBanshee Posted May 31, 2008 Report Posted May 31, 2008 Do you know there is a pedal height adjustment tie rode between the pedal and master cylinder? :ermm: I wonder if the threaded rod is beyond the no-go hole in the barrel if the pedal is sitting that high... Quote
kwickez Posted May 31, 2008 Author Report Posted May 31, 2008 I wonder if the threaded rod is beyond the no-go hole in the barrel if the pedal is sitting that high... the thread nut is all the way down right now Quote
MikeNick Posted August 18, 2008 Report Posted August 18, 2008 The Shee I just got has the same thing wrong man..People who had it before didnt mess with the pedal adj an theres a good size worn spot on the clutch cover..grr Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.