lowbuckracing Posted May 19, 2008 Report Posted May 19, 2008 complete nut and bolt set for bike,swinger,pegs,shocks..etc front hubs new front sproket new rear sprocket new chain for +4 swinger rear axle 35mm,must be straight and have washers and nuts,good threads. carbs for the 4 mill motor,35 airstrikers or? seat So far that is it..I will keep updating..Thanks,Lowbuckracing! Quote
Bill Posted May 19, 2008 Report Posted May 19, 2008 I have A stock axel,strait as an arrow and the splines and threads and nuts are great. Quote
lowbuckracing Posted May 19, 2008 Author Report Posted May 19, 2008 I have A stock axel,strait as an arrow and the splines and threads and nuts are great. We will take it....pm me your addy for some tickets..please ship to Lowbuckracing 315 Santa Rita Place Banning Ca 92220 Thanks Bill!!!!!!!!!!!!!!!!!! Quote
bansheerage Posted May 19, 2008 Report Posted May 19, 2008 i asked if you needed a seat a while ago you never said yay or nay but now i see you need one. i still have if you need it. maybee you can just get it redone. Quote
lowbuckracing Posted May 21, 2008 Author Report Posted May 21, 2008 i asked if you needed a seat a while ago you never said yay or nay but now i see you need one. i still have if you need it. maybee you can just get it redone. I need that seat,I pmd the wrong guy..sorry bro..Send to Lowbuckracing 315 Santa Rita Place Banning Ca 92220 Pm me your addy and I can ship tickets thanks..lowbuckracing!Didnt you already donate that toomey radiator?I will hook you up this time frank!You kick azz..JB..Lowbuckracing! Quote
lowbuckracing Posted May 21, 2008 Author Report Posted May 21, 2008 OUTTER HUB WENT TO HERR 1ST CLASS TODAY. thanks john...Tickets went out monday..3rd class lowbuck style! Quote
lowbuckracing Posted May 21, 2008 Author Report Posted May 21, 2008 Thanks to Flyhighprerunner for donating the 34 pjs and intakes for this build! John or Nyuk came threw with a hub for our motor Bill has a axle on standby and for a second donation Bansheerage with a seat and a sweet toomey radiator!Thanks everyone so far! Stil looking for a complete nut and bolt set for the swinger,a-arms,pegs etc.... also need front and rear new sprockets and chain for +4 swinger.... Let me know what you got..Thanks..Lowbuckracing Quote
lilmikey Posted May 21, 2008 Report Posted May 21, 2008 Hey James, I just wanted to let you know I sent out the wiring harness yesterday via usps, you should have it by tomorrow, I have some other parts laying around, Let me know what you are in desperate need of. I am sure I have some other things you can use. as soon as I get my blue bike done. I will start getting rid of all my extra parts. I know I have a set of factory 909 bars, just the standard ones, I am pretty sure I have some stock a arms upper and lower and I know for sure I have some spindles and calipers off of an old j arm front end. Pm me and we can go from there. I also think I have the stock tie rods as well. hit me back. later Mike. I also will be selling some items later on, so I will keep you posted. Quote
KEVSWS6 Posted May 22, 2008 Report Posted May 22, 2008 OUTTER HUB WENT TO HERR 1ST CLASS TODAY. Something got mixed up. I need the outer clutch basket with the gear on back. Not the pressure plate. You sent me the pressure plate. We have lots of these. Sorry for the mix up. Quote
lowbuckracing Posted May 23, 2008 Author Report Posted May 23, 2008 Hey James, I just wanted to let you know I sent out the wiring harness yesterday via usps, you should have it by tomorrow, I have some other parts laying around, Let me know what you are in desperate need of. I am sure I have some other things you can use. as soon as I get my blue bike done. I will start getting rid of all my extra parts. I know I have a set of factory 909 bars, just the standard ones, I am pretty sure I have some stock a arms upper and lower and I know for sure I have some spindles and calipers off of an old j arm front end. Pm me and we can go from there. I also think I have the stock tie rods as well. hit me back. later Mike. I also will be selling some items later on, so I will keep you posted. If the tyrods Have ends,I will need those..Thanks..Lowbuck Quote
baddsheee Posted May 23, 2008 Report Posted May 23, 2008 I have some stock front shocks if you want them. PM me. Quote
lowbuckracing Posted May 23, 2008 Author Report Posted May 23, 2008 I have some stock front shocks if you want them. PM me. Hey Jorge..I need your shipping addy to have the seat sent to you for the embroidery...I may hit you up on the shocks..Im waiting to see if some show in the next couple of days!Thanks..also gonna need some more hats pretty soon,Those looked really good...Just need some more cash!lol..dam bills. Quote
caddyman Posted May 23, 2008 Report Posted May 23, 2008 Hey Jorge..I need your shipping addy to have the seat sent to you for the embroidery...I may hit you up on the shocks..Im waiting to see if some show in the next couple of days!Thanks..also gonna need some more hats pretty soon,Those looked really good...Just need some more cash!lol..dam bills. If that falls through JB, let me know...... A good buddy of mine does upolstry and I could have him do whatever you need. He did a total custom seat for my street bike. KILLER work, and I'd be happy to help with it. Later...... Oh, got my raffle tix today! Thanks much!! Quote
lowbuckracing Posted May 26, 2008 Author Report Posted May 26, 2008 Still looking for the complete bolt and nut set for the hq build,swinger,peg,a-arms,all the nuts and bolts.... Also looking for new front and rear sprockets and a chain..Thanks..Lowbuckracing Need the hub with the gear attached for the clutch also..must be in great shape..Like if you upgraded and still have a nice one.. Thanks..Lowbuckracing Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.