gmctruck1976 Posted May 16, 2008 Report Posted May 16, 2008 Hi guys not sure how much this subject comes up, but im wanting to do a port and polish my self on my shee got nothing but time to put in to it and have done a few clean ups in my time, but am looking in to more details for port timing, angles and actual hard data on an egressive trail setup for lowend power dose any one have some insight on any of this and point me in the right direction to learn more about this, i know there are alot of grate racing co out there that do this stuff for cheap. just something i would like to get into sending it to the shop is one thing doing it your self is some thing to learn for the future ive got the tools just looking for the knowhow any help would be appceated Quote
Leadfoot350 Posted May 17, 2008 Report Posted May 17, 2008 if you want to port it yourself go get yourself about 800 dollars worth of porting tools and then we can tell you how to do it. Just let me know when you got the stuff. Quote
Troubledsol Posted May 17, 2008 Report Posted May 17, 2008 Contact a company called Race logic from them you can buy stencils with patterns to port your own jugs I just ordered a set the other day Quote
yamaha_daniel Posted May 18, 2008 Report Posted May 18, 2008 Contact a company called Race logic from them you can buy stencils with patterns to port your own jugs I just ordered a set the other day http://www.racelogic.com/shop/ cost 89.95 you have two choices 1. YFZ 350 Banshee (all) Stage II Fast Trail 2. YFZ 350 Banshee (all) Stage III Superstock NEW Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.