rattle right behind the kick starter?

[kawiking]

did they put it together for u ??

[lowbuckracing]

yep they charged me 1700.00 for new d&d cool head with 18cc domes 65mm cheetah cubs and new pistons and when i got it back it wasnt jetted right was way rich was faster when i took it to them

i told him it started nocking again he said ya but now you got horse power not verry happy this is the second builder i took it to the first one i had them bore my stock cylinders and ordered new pistons that was another 900.00 so im getting tired of these lame ass wanna b builders cost me a fortune for their practice

go to herrjugsracing.com Trust me! or call kev yourself...Dont let any smoe work on your bike!

[kawiking]

yep... ive been threw my local builders....

 

my stock jug drag port wasnt a drag port.... but thats what i payed for. jeff at F.A.S.T said it looked like his clean up port.

 

local guy bored one of my cylns a hair to big.. i started it up on a cold day and snapped the bottom of my piston off... 5hrs on this motor.

 

so.. thats why jeff at F.A.S.T. is buildin my 4 mill cub for me.

[_Hex*]

ok so i went and tore my clutch apart and no broken plates but i checked my clutch basket and there is a lil play i can grab the basket and move it a lil bit twisting and pulling

 

your cushings are spent, you will probably have to replace the basket with a stock new one or just go with a hinson basket. that play will wear out your metals if you dont take care of it

[banshee(911)]

your cushings are spent, you will probably have to replace the basket with a stock new one or just go with a hinson basket. that play will wear out your metals if you dont take care of it

as i posted in the begining i had this b-4 and D&D told me it was my clutch bushings so i bought new bushings and a billet basket still there when i adjust my clutch it goes away for a lil ride then on the was back home its back

[banshee(911)]

yep... ive been threw my local builders....

 

my stock jug drag port wasnt a drag port.... but thats what i payed for. jeff at F.A.S.T said it looked like his clean up port.

 

local guy bored one of my cylns a hair to big.. i started it up on a cold day and snapped the bottom of my piston off... 5hrs on this motor.

 

so.. thats why jeff at F.A.S.T. is buildin my 4 mill cub for me.

isnt it real expensive to ship the whole motor or are you close to kansas?

[shanYE west]

here is a vid he sent me of his problem.

 

hope it works

 

http://s78.photobucket.com/albums/j102/fou...t=MOV-00062.flv

Edited May 20, 2008 by Fouledout421