2 stroke oil calculator

[JasonsBanshee]

This is pretty nice to use if you are not sure on how much oil to mix with your gas. The bike I just bought came with 6 oz of two stroke oil that I'm going to finish up before I switch over to benol and I used this calculator to figure out that I'll need 1.5 gallons of fuel to the 6oz of oil for a 32:1 mix. I hope someone else out there can use this.

 

http://www.csgnetwork.com/oilfuelcalc.html

[awaitedshee]

i use the ratio rite cup it gives all sorts of ratios from the leanest to richest and from a half gallon to two and a half gallons all you do is measure to the line you want for the mixture for however many gallons your using

[Snopczynski]

buy castor 927 in 16 oz bottles and dump the whole thing into a 5 gallon can. Then put gas in it, your done.

[JasonsBanshee]

I buy benol by the gallon and use a ratio cup with it. I like the calculator because I had no idea on how much gas to mix with 6oz of oil to get a 32:1 ratio.

[omalavet]

im from puerto rico here the gas pump is in liters... i just use 1 once per liter

[BansheeRider71]

That little thing is handy,

back when I ran yama-lube all I did was put in a pint(16oz) to 4 gallons of gas = 32:1

I do the same thing now that im running KLOTZ Super-Techniplate for 32:1