Troubledsol Posted April 2, 2008 Report Posted April 2, 2008 Just wanted to get everyones opinion on this I can get a set of PT mids for cheap and was curious if any one is running them with a 2 into 1 carb and how it runs Or if I should go back to duals I am currently running FMF Golds with the 2 into 1 and really like how it runs in the trails Thanks Quote
endofitall9 Posted April 2, 2008 Report Posted April 2, 2008 I used to run that setup...I had a really hard time getting it dialed in, i probably had more money in jets and needles than what i paid for the setup...lol it ran good and had more topend than my stockers but in my opinion, the duals run way better with the mids than the 2 into 1 does. I sold my 2 into 1 and put 28mm kehiens and got way better throttle response and more bottom than i had with the 2 into 1 but I lost some top.....my opinion is stick with the duals... Quote
Troubledsol Posted April 6, 2008 Author Report Posted April 6, 2008 Anyone else running this setup or have any info about it Quote
dirtclod20 Posted April 13, 2008 Report Posted April 13, 2008 Anyone else running this setup or have any info about it I have Paul Turn Mids and 2-1 with a 33pwk and have always liked it. Jetting is as easy as it makes power. Last winter I put a Jim Passion engine in and it started and ran fantastic. I am looking to put in a needle and rejet, but even with a mild ported engine I don't have reservations about telling people about my setup Marcus Quote
djackbanshee Posted April 13, 2008 Report Posted April 13, 2008 I ran pt mids with a 2-1 and it was a torque monster great for playing around ...... Quote
Snopczynski Posted April 13, 2008 Report Posted April 13, 2008 I ran pt mids with a 2-1 and it was a torque monster great for playing around ...... Pro circuits will make more torque. Ditch the 2 into 1 and run dual 28mm flat slides. Torque difference will be unnoticeable and the twins will make about 4-5 more hp at peak rpm. Quote
dirtclod20 Posted October 25, 2008 Report Posted October 25, 2008 Pro circuits will make more torque. Ditch the 2 into 1 and run dual 28mm flat slides. Torque difference will be unnoticeable and the twins will make about 4-5 more hp at peak rpm. point me in the direction of a good point of purchasing them and I may give it a go. Marcus Quote
Snopczynski Posted October 26, 2008 Report Posted October 26, 2008 point me in the direction of a good point of purchasing them and I may give it a go. Marcus ??????????? Point of purchasing which one. Do a search! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.