Stock Width?

[Re4peR26]

I put extended aarms on my quad and im looking to see what the specs are of the front end STOCK with stock wheels and tires.. does anyone know how wide the stocker is?? Im 48.1/2 up front and 50 in the rear! could you take mesurments if your stock!

[KrewZer]

try this? Benshee Specs

[spike]

yeah its about 44", you might want to remove some spacers on your rear axle, Its not the best to be wider in the back, I like refering to it as the "3 wheeler effect" think about how tippy is a 3 wheeler... the best setup IMO is to be about 1" wider overall in front than out back.

[Dinner]

Well the stock rear axle is 36 1/2" in length, but then you would have to add the hub-outside of tire dimension as well. If someone else hasn't posted later on, I will try to get out and measure those specs for you when I'm home from work.

[Re4peR26]

yeah its about 44", you might want to remove some spacers on your rear axle, Its not the best to be wider in the back, I like refering to it as the "3 wheeler effect" think about how tippy is a 3 wheeler... the best setup IMO is to be about 1" wider overall in front than out back.

I dont have spacers i have a LSR axle thats all

[Re4peR26]

rear!

overall

closeup

 

Sorry for dumb pics camera phone lol

[spike]

I dont have spacers i have a LSR axle thats all

I'm talking about the bushings that are between the hub and the axle shoulder, they are there so you can adjust the width of your bike. stock is 44" front and back

[jamebo]

I haven't actually measured the front end, but my owners manual says the overall width is 43.3 in.