Hilarious Posted March 5, 2008 Report Posted March 5, 2008 Are you gonna tear those banshee motors down? I need the little water pump gear off the crank, kickstart assembly, kicker gear, the collar that the clutch basket rides on, and one of those seats. Quote
f4istunna Posted March 5, 2008 Author Report Posted March 5, 2008 id really rather sell whole, but i guess if they dont go in a few days or so i can tear into one of them. :biggrin: Quote
88_trex Posted March 5, 2008 Report Posted March 5, 2008 Ok got everything tore down and made up a list of everything. I have pics of most of it also. Prices are what id like to get but im negotiable. All is + shipping to your zip. If you buy a few things ill make package deals/discounts. Located in NE ohio if close feel free to come by and pick up, maybe able to meet up if needed w/in cpl hundred miles for gas on bigger parts Engine parts: 01 motor bottom end, crank bearings seized. Good tranny, goes through gears, good clutch side covers, kicker included, Left case has the normal banshee chunk missing from chain smacking it, but its just on the lip nowhere where it would cause leaking problems or anything other than cosmetic. I havent removed the topend yet to check the cylinders but i was told they were fresh (under 10hrs) wiseco .20 over bore. Also has Pro design Cool head in good shape. $550 ??year bottom end Crank bearings seized, has clutch, good tranny, kicker, sidecovers etc complete. No case damage. $250 Cylinders no gouges or deep scratches pretty sure stock bore $150 Stock head $25 one dome has some buildup needs cleaned. Stock carbs $20 stock carbs complete $35 Radiator w/ hoses, cap $50 Dg full pipes $75 Reeds w/ cage $15 Electrical Complete Wire harness w/ components coil, cdi etc $30 Headlight switch $20 Ignition switch w/ key $15 Headlights $25 (pair) -- Frame $200 painted lime green, all threads are good, looks to be straight, no cracks or damage that i noticed. Bill of sale -- chrome Front bumper ? not sure brand? $20 -- chrome Grab bar $15 -- Black/blue seat w/ pan, foam, cover, latch gripper material center blue sides $35 --Rear wheel hubs (pair) $25 --Thumb throttle w/ cables $20 -- Stock axle $40 -- Steering stem $40 --spindles (pair) $30 -- stock footpegs (pair) $5 -- Rear brake hub w/ rotor $20 -- Front wheel hubs w/ rotors $40 -- Rear brake master cylinder w/ lever and resi$25 -- Rear brake caliper w/ lines $30 --Front brake calipers w/ lines hard and rubber $40 -- Front master w/ lever $20 --Front oem wheels straight, normal trail scuffs and nicks on lips $55 (pair) --Front ITP wheels (thick aluminum) some nicks on lips, hold air and straight $70 or with 50-60% maxxis razr 21" $85 --Rear oem wheels normal trail wear on lips $65 --stock front shocks $15 -- Rear shock $25 --clutch lever perch and cable $15 --Plastics Blue race cut fronts, stock rears, no cracks w/ tank cover and rad cover $80 --Rear sprocket 41t w/ hub $10 --Gas tank w/ cap and petcock $25 --Swingarm w/ carrier (good bearings) $55 --Rear shock linkages $10 --A arms good balljoints on all right lower has dent, still looks to be straight but pretty good dent on bottom $50 for all 4 --tie rods w/ ends $20 do you have any pics of the ??year cases? Quote
f4istunna Posted March 5, 2008 Author Report Posted March 5, 2008 do you have any pics of the ??year cases? yep have pics of pretty much everything. I have a sale pending for it monday im supposed to meet up w/ the guy, but if it falls through Shoot me your email and ill send you some pics incase, it says i cant upload any more pics. I guess i used to much space lol Quote
f4istunna Posted March 6, 2008 Author Report Posted March 6, 2008 sent PM about bumper Replied thanks :biggrin: Quote
88_trex Posted March 6, 2008 Report Posted March 6, 2008 yep have pics of pretty much everything. I have a sale pending for it monday im supposed to meet up w/ the guy, but if it falls through Shoot me your email and ill send you some pics incase, it says i cant upload any more pics. I guess i used to much space lol thanks my email is [email protected] Quote
f4istunna Posted March 6, 2008 Author Report Posted March 6, 2008 Ks just saw your post I have flywheels but im trying to sell the motors complete for the time being. If they dont go soon ill tear into them. Quote
f4istunna Posted March 7, 2008 Author Report Posted March 7, 2008 Axle OEM rear wheels SOLD We started to put a few of the parts on fleabay also bumper grab bar seat radiator steering stem front hubs and rotors If you guys are interested in any of that my ebay name is f4istuntin Thanks Quote
9498banshee Posted March 10, 2008 Report Posted March 10, 2008 do oyu have any stock heel guards? Quote
f4istunna Posted March 10, 2008 Author Report Posted March 10, 2008 do oyu have any stock heel guards? It didnt have any heelguard sorry, I have a set from a blaster if they happen to fit by chance??? You can have them just cover shipping if so. Quote
f4istunna Posted March 10, 2008 Author Report Posted March 10, 2008 One complete motor sold today w/ reeds. still have a complete bottom end needing crank and the cylinders/coolhead are listed on ebay. Bottom ends probably going on in a day or 2 if no one takes it Thanks :cool: Quote
88_trex Posted March 10, 2008 Report Posted March 10, 2008 One complete motor sold today w/ reeds. still have a complete bottom end needing crank and the cylinders/coolhead are listed on ebay. Bottom ends probably going on in a day or 2 if no one takes it Thanks :cool: what you asking for complete bottom end? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.