bunboy1 Posted February 2, 2008 Report Posted February 2, 2008 hi all, i just got a modquad chain roller set. it did not come with any instructions. does anybody know how to install this. will i have to remove the swing arm? how does fit exactly, any picture will help, thanks. Quote
Dave I. Posted February 2, 2008 Report Posted February 2, 2008 yea you have to pull the swinger bolt out and drop it down to slide the stock one off and the new one on. I removed the little metal collar that was on there. Im not sure if you have to or not, but i did and it has been fine. Quote
jbooker82 Posted February 2, 2008 Report Posted February 2, 2008 Some of them are cut so you can put them on with out taking the swing arm off. Quote
inthemail Posted February 2, 2008 Report Posted February 2, 2008 Some of them are cut so you can put them on with out taking the swing arm off. Them UPP Split ones are pimp. check it out if yours looks the same you could probley put a cut in it. altho im allways up for the "right" way of doing things considering 7 years of the "backyard" way has ruined my shee. but the ruination has become inspiration! Quote
bunboy1 Posted February 2, 2008 Author Report Posted February 2, 2008 yea you have to pull the swinger bolt out and drop it down to slide the stock one off and the new one on. I removed the little metal collar that was on there. Im not sure if you have to or not, but i did and it has been fine. did you only remove the swingarm bolt? did you have to undo the shock? did you have to buy any new oil seals? thanks. Quote
Dave I. Posted February 2, 2008 Report Posted February 2, 2008 I cant remember for sure if I had to take a bolt out of the shock or not. I didnt buy any new seals. When you get the swingarm bolt out you will be able to see if you need to take a shot bolt out or not.....just start rippin it apart, you will get it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.