04titanse Posted January 30, 2008 Report Share Posted January 30, 2008 I bought a used set of toomey t5's w/ silencers about 4 months ago and they mount up on the machine ok and the bike runs great but i noticed that they dont fit the same on both sides. Like the left side by is like a 1/16" away from touching my Fast Noss Head and the right side is like a full inch away from the cool head. I this common or is there a problem with the pipes or something? thanks Quote Link to comment Share on other sites More sharing options...
hyperlite33 Posted January 30, 2008 Report Share Posted January 30, 2008 I think your okay...mine fit a little different on each side. I think the right one is almost an inch longer but I just chock it up to the frame may be a little bit tweaked. Quote Link to comment Share on other sites More sharing options...
04titanse Posted January 30, 2008 Author Report Share Posted January 30, 2008 I think your okay...mine fit a little different on each side. I think the right one is almost an inch longer but I just chock it up to the frame may be a little bit tweaked. alright thats good to know. Anyone else have this same problem? How do i tell if my frame is tweaked? Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 31, 2008 Report Share Posted January 31, 2008 That is just how they fit. The banshee's engine is not centered in the frame. My CPI's fit really close to the motor and air filters on the LH side but clear by a mile on the RH side. I have to run a heat wrap on the LH singer tube so I dont melt an outwer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.