mazuullaa Posted January 29, 2008 Report Posted January 29, 2008 I just got a works remote resevoir rear shock and was wondering where some of you mounted the resevoir? Quote
FireHead Posted January 29, 2008 Report Posted January 29, 2008 I just got a works remote resevoir rear shock and was wondering where some of you mounted the resevoir? On the frame. :geek: Quote
mazuullaa Posted January 30, 2008 Author Report Posted January 30, 2008 On the frame. :geek: That sounds like a good idea i was going to put it on the right pod filter :biggrin: I was just interested if someone had a good place to put one on the frame. Not alot of choices I guess Quote
differentstrokes Posted February 7, 2008 Report Posted February 7, 2008 Depending on how long the rezzie line is, I'd mount it on the outer frame rail right under the gas tank so you can reach the compression adjustment without getting off the seat. Quote
Bansh-eman Posted February 7, 2008 Report Posted February 7, 2008 works doesnt put very long lines on them. you should have just enough to mount it on the frame. just make sure you put the adjuster faced out. Quote
toomeyshee87 Posted February 13, 2008 Report Posted February 13, 2008 mount it on the subframe tube that goes up from down by the footpeg Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.