problem with idle

[bakerboy]

i installed some pipes and an air filter and changed my jetting and now my bike idles really high compare to when i had my stock pipes... what can be causing this problem?? and how can i fix it??

[notatallhappy]

i installed some pipes and an air filter and changed my jetting and now my bike idles really high compare to when i had my stock pipes... what can be causing this problem?? and how can i fix it??

 

 

 

Do you still have the tors system? If so remove it. what is your elevation and what pipes

[kevl]

Do you still have the tors system? If so remove it. what is your elevation and what pipes

sorry to but in but i have the same problem. if you remove the tors what do you replace it with

[bansheefreak]

you might spray carb cleaner around carbs why running see if it bogs down if so you might have an airleak.. as far as the tors just cut the shit off nutin needs to be replaced..

[bansheejoel]

you buy a tors elimanter kit...there like 50 bucks comes with new caps for carbs

[bakerboy]

i installed fmf fatty's with powercore2 and K&N air filter and im located at 967 feet above sea level...i think i fixed the problem but im not sure if its the right way to fix it, i set my pilot screws to 1 turn out instead of 2...

Edited January 21, 2008 by bakerboy

[kojack]

Make sure your slides arent in backwards, check the cables to be sure that they arent getting hung up mabye at the y. I had this happen a few times before and it keeps a slide from seating all the way down which causes it to idle high. To set the idle do you have a carb sync tool. Jeff at fast sells one that works great. I would start there. Good luck