BANSHEEE Posted January 7, 2008 Report Posted January 7, 2008 Just did a top end rebuild a few weeks ago bike has fmf fatty pipes,tors removed dyno jet jet kit 290 in the main. Bike idles really nice neddles are both set in the middle and i tryed 2 and a half out and also tryed 1 and a half out on the air screw bike still boogs down low and power band kicks in really nice.Pro lites piston 4 over are installed. thanks for any help. Quote
BANSHEEE Posted January 7, 2008 Author Report Posted January 7, 2008 How do i stop the boggin down low.Also tryed the needle at the top still the same. Quote
KaosBanshee44 Posted January 7, 2008 Report Posted January 7, 2008 Your talking about when you first take off, example like just taking off fast? Or when it is idle? Quote
shanYE west Posted January 7, 2008 Report Posted January 7, 2008 sounds like your pilots are off Quote
BANSHEEE Posted January 7, 2008 Author Report Posted January 7, 2008 Taking of fast and slow justs boggs real bad feals like you have to load it up and then power band comes on. Quote
peak-j Posted January 7, 2008 Report Posted January 7, 2008 Did you synchronize your carbs yet. Quote
Handyman Posted January 7, 2008 Report Posted January 7, 2008 I would look at your pilot jet..I noticed that when I had to bore to the 2nd oversize that it was boggy off idle and when I tried to open her up from putting around. Went to a 27.5 and made all the difference. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.