pabansheematt Posted January 3, 2008 Report Posted January 3, 2008 What???I Was Outside with a longsleeve shirt and a THICK miami heat jacket and I couldnt take it anymore lol Air hammer is the way to go. If that dont work get the die grinder out. I only ever had to cut one off and it was off a 1987 19 years of rust will do that. good luck. Quote
bk_banshee Posted January 3, 2008 Report Posted January 3, 2008 Air hammer is the way to go. If that dont work get the die grinder out. I only ever had to cut one off and it was off a 1987 19 years of rust will do that. good luck. I had to cut mine off it was a 99. never took care of it. go spray WD40 on it every hour till you try next time. The bolt gets rusted to the pivot tube and wont slide out of the frame. Quote
BaNsHeeJuNkEy Posted January 3, 2008 Report Posted January 3, 2008 40 is t-shirt weather all day long. and like everyone elsa said get it off the ground. and start banging away if you don't have a air chizle. it took me 2 hours to get my brothers out of his 400ex with a 5bls hammer. see if u can get some pb blast in the it will eat away at the rust some. but either way you got some banging to do if it is rusted in. Quote
theshee Posted January 3, 2008 Report Posted January 3, 2008 little note 06- when you put it back in, put a little coat of anitsieze in there, that will help for ruture work. I will get you a pic tomorrow of 10 degrees and 40mph wind. Quote
bladesracing Posted January 3, 2008 Report Posted January 3, 2008 40 is t-shirt weather all day long. and like everyone elsa said get it off the ground. and start banging away if you don't have a air chizle. it took me 2 hours to get my brothers out of his 400ex with a 5bls hammer. see if u can get some pb blast in the it will eat away at the rust some. but either way you got some banging to do if it is rusted in. PB blaster is needed for sure. that and a mini sledgehammer Quote
06BaNsHeE Posted January 3, 2008 Author Report Posted January 3, 2008 little note 06- when you put it back in, put a little coat of anitsieze in there, that will help for ruture work. I will get you a pic tomorrow of 10 degrees and 40mph wind. Ill go tommorow and buy some after I get it out.I have no tools other than your average tool box.Im just hamering it out.Atleast I know it happens to everyone.Im waking up at 7am and lifting the shee and Hammer the shit out.Ill try spraying wd40 evry hour till I go to sleep now tho. Thats just crazy.10 degrees and 40mph wind lol wow I dont think I can handle it Quote
ellison445 Posted January 3, 2008 Report Posted January 3, 2008 Saw Jaw, 2 beers and a New Pivot bolt...... Worked for me :biggrin: :biggrin: Quote
Dinner Posted January 3, 2008 Report Posted January 3, 2008 Geez you guys having 10 degree F weather really must be something right now. It's only -15 C right now without wind and this is just early winter :laugh: But yes get the bike sitting on blocks or something (under the engine), remove the wheels and remove the shock. Then if need be you can move the swinger up and down while you are banging out the bolt. Quote
fastrthnu Posted January 3, 2008 Report Posted January 3, 2008 I had that happen on a bike I was parting out. It had a +4 swinger on it and the bolt would not come out for anything. Ended up having to cut it up to sell the frame. Tried sledge hammers, torch, penatration oils, and all. Wasted a nice swinger. :shrug: this was with the spring off too. Quote
desert nut Posted January 3, 2008 Report Posted January 3, 2008 Thanks Ill try that tommorow morning.Its like 40 degreez here in Miami And to cold to work on the banshee.Ill post back tommorow. take the nut off soak it with lube take 3 pieces of 2x4's and a sledge hammer and pound the s out of it i promise it will come loose 3 pieces because at least 2 will break by the time you are done Quote
06BaNsHeE Posted January 3, 2008 Author Report Posted January 3, 2008 take the nut off soak it with lube take 3 pieces of 2x4's and a sledge hammer and pound the s out of it i promise it will come loose 3 pieces because at least 2 will break by the time you are done That thing aint coming of.It has moved maybe 1/48 of an inch lol.I can spin it around in circles its just not moving up and down.I lifted it of the ground and everything Quote
desert nut Posted January 3, 2008 Report Posted January 3, 2008 That thing aint coming of.It has moved maybe 1/48 of an inch lol.I can spin it around in circles its just not moving up and down.I lifted it of the ground and everything just spin and bang spin and bang bang bang and lube lol Quote
06BaNsHeE Posted January 3, 2008 Author Report Posted January 3, 2008 just spin and bang spin and bang bang bang and lube lol Lol Im just waiting for my motor than Ill take it to the local guy and let him do it lol. Quote
theshee Posted January 3, 2008 Report Posted January 3, 2008 Lol Im just waiting for my motor than Ill take it to the local guy and let him do it lol. Have somebody turn it while you beat its ass out of there. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.