Tranny problem on the shee

[PJDM4LIF3]

I was riding and it got stuck in gear. What are the possibilities that can be wrong and wear can i find parts for the problem/tranny?

[NYUK]

i have a few trannies, could be a bent fork.

[91banshee]

does the shift lever move up and down ? The ratchet claw on the shift shaft that grabs the shift star could be bent and not grabing the shift star. i would first pull the clutch cover off and look behind the clutch basket down at the shift shaft and move it around like your shiftinggears see if it grabs the shift star correctly.

[PJDM4LIF3]

does the shift lever move up and down ? The ratchet claw on the shift shaft that grabs the shift star could be bent and not grabing the shift star. i would first pull the clutch cover off and look behind the clutch basket down at the shift shaft and move it around like your shiftinggears see if it grabs the shift star correctly.

 

No its not grabbing it correctly. A freind told me that it may be that rod that goes threw the engine wich the shifter is connected to. Do you know where i can find/buy that part?

[BigRed350x]

I wouldnt go crazy buying parts until you actually pull the clutch cover, clutch, and visually inspect the shift components... Just because a buddy tells you it might be something, doesn't mean that's what it is...

 

I agree with the above post, its probably the shift claw not engaging correctly on the shift star. I've seen the springs on the claw get worn and not return the mechanism to its correct place. Check the shift claw mechanism and if you dont find your solution there, split the cases and check your shift forks. Once you've inspected and checked everything, then order the parts you need to fix it, if any.

[NYUK]

I HAVE A COUPLE SHIFT SHAFTS.

[LS1Inferno]

What gear is it stuck in? If it low or has no oil, 5th gear will lock up on the shaft, and the dog ears will get jammed together.

[PJDM4LIF3]

I HAVE A COUPLE SHIFT SHAFTS.

 

I dont want to get into something i dont need thats why i havnt got back to you!

[PJDM4LIF3]

What gear is it stuck in? If it low or has no oil, 5th gear will lock up on the shaft, and the dog ears will get jammed together.

 

I ran it with no oil thats when the problem started. It got stuck in 3rd and i forced it to fith.

[toolman]

I have had the same problem. had to change the shifter shaft with the fork on the end and the drum and some gears that were worn.

 

Tim

[91banshee]

I ran it with no oil thats when the problem started. It got stuck in 3rd and i forced it to fith.

 

lol better pm nyuk for his tranny , your gona need more than a shift shaft

[PJDM4LIF3]

lol better pm nyuk for his tranny , your gona need more than a shift shaft

 

o0o0o0o0..damn..Lol Thanks for the advice!

[BigRed350x]

Why the hell did you run it without any oil? Second... when it didn't shift right, why did you force it into 5th?? :shrug: :shoothead: ::

[PJDM4LIF3]

Why the hell did you run it without any oil? Second... when it didn't shift right, why did you force it into 5th?? :shrug: :shoothead: ::

 

It had a leak and i forget to add oil. I forced into 5th because there was no tow rope and i was far from my truck! :verymad:

[BigRed350x]

It had a leak and i forget to add oil. I forced into 5th because there was no tow rope and i was far from my truck! :verymad:

 

OK, why didn't you fix the leak when you noticed it? ...and how would forcing it into 5th help you any? If you could have ridden to your truck in 5th then why not ride it there in 3rd, the gear you were stuck in initially?