wacko2000 Posted December 10, 2007 Report Posted December 10, 2007 Well tell me what you see and help me if you can.. I bought these carbs from member on the HQ, wont reviel his name just yet.... I just took the bowls off to check what jets where in there and clean everything and this is what I found...... What the hell happened here? I dont even know what to say.. Also the jets that where in the carbs where different.. Mains- 170rd and 170 Quote
jbooker82 Posted December 10, 2007 Report Posted December 10, 2007 Nothing to get 2 upset over. Looks liek they cut a float off so the bowl would hold more fuel. If you dont like the idea you can always get a couple replacements. josh Quote
bigdaddy69 Posted December 10, 2007 Report Posted December 10, 2007 I agree you can get replacements. But I'm on your side, that sucks you got ripped like that. You should have been informed before you paid for them. I say contact the seller let them know you are not happy about the product see if yall cant work something out. Good luck Quote
wacko2000 Posted December 10, 2007 Author Report Posted December 10, 2007 Thanks guys, I already sent him a pm and a email.. He is a member on here, If we work something out and he makes this right then kool, if not I will let everyone know whats up.... Quote
bigdaddy69 Posted December 10, 2007 Report Posted December 10, 2007 Good idea. I like the fact your giving him a chance before you bash him. Quote
wacko2000 Posted December 10, 2007 Author Report Posted December 10, 2007 Can someone tell me where I can get replacments, also what else I will have to replace? Quote
bigdaddy69 Posted December 10, 2007 Report Posted December 10, 2007 (edited) your builder should be able to get them for you. By the looks of your sig you use passion, give them a holler see what they say if not then call Jeff at FAST his number is in my sig. Edited December 10, 2007 by bigdaddy69 Quote
2strokespirit Posted December 10, 2007 Report Posted December 10, 2007 yeah man, that sucks. It will run like that, but replace them or sort it out with the seller. Quote
wesw Posted December 10, 2007 Report Posted December 10, 2007 www.sudco.com have to search out the pwk33 carb you can get the part but like they said it was cut to allow more fuel just adjust the float and it should work. Quote
dajogejr Posted December 10, 2007 Report Posted December 10, 2007 I would be upset if I wasn't made aware that is how the carbs were setup. However....I'd be more concerned if the dump tube were drilled for alky...as I told him in a PM. They will never work for gas if that's the case. As long as the dump tubes are ok...I would be asking the seller to purchase new floats for these carbs and have them shipped to you... It is common for people to remove a float for more capacity as said. however, it should be noted that this mod was done prior to the sale... They still should work...however. Quote
BigRed350x Posted December 10, 2007 Report Posted December 10, 2007 I did that to a set of 33's when I ran them on my old cub setup last year. Cut one float out of them for more fuel. The seller should have informed you of the missing floats though. - Jared Quote
dajogejr Posted December 10, 2007 Report Posted December 10, 2007 You didn't have to post this in general repair and jetting/exhaust. Ask loco to move/merge the threads.... Quote
Snopczynski Posted December 10, 2007 Report Posted December 10, 2007 my pwk 35mm did that. Just replaced it and it has been ok. Quote
wacko2000 Posted December 10, 2007 Author Report Posted December 10, 2007 I did that to a set of 33's when I ran them on my old cub setup last year. Cut one float out of them for more fuel. The seller should have informed you of the missing floats though. - Jared Jared I believe that these are the carbs you sold on here last year.. Can you help me out and give me some info on them and how this will affect me... what is the best way to make sure the floats are performing properly? thanks Joseph sorry for the double thread, I will ask loco to take care of this for me... Quote
theshee Posted December 10, 2007 Report Posted December 10, 2007 just move the float and make sure the seat is closing and opening alright. If its not working your carbs should be dumping fuel out the overlow tubes. They should still work, but i wouldnt be very happy about buying them that way. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.