pweezy42 Posted December 8, 2007 Report Posted December 8, 2007 simple as it was stated i dont have the proper toll for that yet is there something i can use to space it for the time being Quote
sheerider1026 Posted December 8, 2007 Report Posted December 8, 2007 i have heard use a matchbook.. just tear te cover off of a matchbook (u know the free ones u get) and the thickness of the cover is about right.. just what i have heard Quote
badassbanshee479 Posted December 8, 2007 Report Posted December 8, 2007 I have heard a business card will work also, you want it at about .18 - .20 thousandths Quote
brian Posted December 8, 2007 Report Posted December 8, 2007 I have heard a business card will work also, you want it at about .18 - .20 thousandths Do you mean .018-.020 ? .18 is just short if 3/16ths of an inch. Quote
badassbanshee479 Posted December 9, 2007 Report Posted December 9, 2007 yeah sorry it was early Quote
bansheeman1988 Posted December 9, 2007 Report Posted December 9, 2007 yeah what they all said, or go to an ace hardware and buy a feeler guage Quote
ClimbAnyHill Posted December 9, 2007 Report Posted December 9, 2007 Feeler Guages, about $8 at any auto parts store. Quote
NYUK Posted December 9, 2007 Report Posted December 9, 2007 buy a feeler gage. a baseball card is 20 point board. Quote
FireHead Posted December 9, 2007 Report Posted December 9, 2007 yeah what they all said, or go to an ace hardware and buy a feeler guage Word. Feeler Gauges are the only way to do this properly. Quote
rtcc Posted December 10, 2007 Report Posted December 10, 2007 Do you mean .018-.020 ? .18 is just short if 3/16ths of an inch. Is this only for modded motors or should it be this way stock? Quote
badassbanshee479 Posted December 10, 2007 Report Posted December 10, 2007 Is this only for modded motors or should it be this way stock? should be that way stock. make sure you set it at .018-.020 not the .18-.20 (it will not run if you put it that far out!) Quote
FireHead Posted December 10, 2007 Report Posted December 10, 2007 should be that way stock. make sure you set it at .018-.020 not the .18-.20 (it will not run if you put it that far out!) Word. I have found the pick up to produce the best signal at .19". :geek: Quote
shanYE west Posted December 10, 2007 Report Posted December 10, 2007 (edited) I run mine at .016~.017 Edited December 10, 2007 by Fouledout421 Quote
inthemail Posted December 10, 2007 Report Posted December 10, 2007 I run mine at .016~.017 cutan old credit card and sticker there. TIGHT. secure your pickup against it, pull it out with pliers while turning your flywheel. thatws the redneckin way, feeler guages are the proper way, and proper is proper. Quote
inthemail Posted December 10, 2007 Report Posted December 10, 2007 I run mine at .016~.017 cutan old credit card and sticker there. TIGHT. secure your pickup against it, pull it out with pliers while turning your flywheel. thatws the redneckin way, feeler guages are the proper way, and proper is proper. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.