FireHead Posted December 17, 2007 Author Report Posted December 17, 2007 why dont you be the first? .................I would love to do it, but I have it stripped all the way down and now I can't get it apart any further. Maybe if I take some pictures of what I have so far, one of you guys may have an idea. I'll try doing that. :thumbsup: I think I may go post the question over on PS and see what sort of crap I can stir up. :ohmy: Quote
Hilarious Posted December 19, 2007 Report Posted December 19, 2007 .................I would love to do it, but I have it stripped all the way down and now I can't get it apart any further. Maybe if I take some pictures of what I have so far, one of you guys may have an idea. I'll try doing that. :thumbsup: I think I may go post the question over on PS and see what sort of crap I can stir up. :ohmy: Post a pic up here. Let me see it. :shrug: The valve, that is. Edit.....Im sorry. didnt realisze that was 10 days ago. Anyhoo, you got it fixed yet? :geek: Quote
BigRed350x Posted December 19, 2007 Report Posted December 19, 2007 Firehead, just take a dremel and move the stop over a smidge. Sometimes where the little arm hits the stop it isn't quite far enough. Just hit it with a dremel and carbide bit and see if it helps... - Jared Quote
FireHead Posted February 2, 2008 Author Report Posted February 2, 2008 Firehead, just take a dremel and move the stop over a smidge. Sometimes where the little arm hits the stop it isn't quite far enough. Just hit it with a dremel and carbide bit and see if it helps... - Jared I got it fixed. The o-ring on the side that was leaking was installed twisted. Here are some pics of one of these things taken apart: Quote
kawiking Posted February 3, 2008 Report Posted February 3, 2008 where did u buy the repair kit ?? Quote
FireHead Posted February 3, 2008 Author Report Posted February 3, 2008 where did u buy the repair kit ?? Pingel. Quote
FireHead Posted February 3, 2008 Author Report Posted February 3, 2008 can u replace the screen ?? Yes. Quote
misterww225 Posted August 11, 2010 Report Posted August 11, 2010 Holes appear to be 0.4375" dia. and the pressed in brass 0.439" dia. Appears to be stainless ball valve. You can modify a single feed to be a dual feed by removing the plug and adding another 90* nipple as the ball valve has been drilled through. Pingle warns against twisting the fittings (possibly because it will twist the o-ring and cause it to leak). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.