broke Posted October 5, 2007 Report Posted October 5, 2007 (edited) RZ top end with electronics. I think it's on it's first overbore, I can mic it when I tear it apart. 4mm 12 port by Passion. It has never been dyno'd but I would figure on it making around 70hp, but it's a very broad powerband with the powervalves. Head is cut for 110. I'm sure I can get specs on the motor if buyer would like to know them. All seals and guides were fresh when the motor was built, around 10 hours of ride time. $800 4mm trued and welded crank, 10 hours $350 Quick change clutch cover $150 RZ shift forks and drum with Banshee trans $250 32mm lectron carbs set up for gas $400 with Prodesign intake manifolds. Chrome Rockets $400 I will try to get pictures of everything as it's removed. Edited October 5, 2007 by broke Quote
broke Posted October 5, 2007 Author Report Posted October 5, 2007 (edited) Frame with steering stem, Lonestar clamp, Airbox, nerf bars and front bumper. $1200 A-arms $400 Front shocks $650 Swingarm $400 Rear shock $500 $3000 for all $3500 with brakes, spindles, axle, front/rear hubs, Anitfade brake hub and sprocket hub. Edited October 5, 2007 by broke Quote
dajogejr Posted October 8, 2007 Report Posted October 8, 2007 Broke... What are you doing?? are you getting out of it...or just making way for a new project?? Quote
broke Posted October 8, 2007 Author Report Posted October 8, 2007 I just don't have the time anymore. I spent two years building this into what it, then rode it a couple times last year and 10 minutes this year. It just collects dust. Quote
dajogejr Posted October 8, 2007 Report Posted October 8, 2007 Sorry to hear man...I understand. I get antsy when I don't ride for a few weeks..and then...there's Winter. I bet that was one fun ass, rippen bike to ride...that handled like an absolute dream with gobs of usable power.... Good luck to ya man...wish ya all the best. Free bump for a nice guy and good stuff for sale....can't go wrong dealing with Broke! Quote
Cykotik Posted October 8, 2007 Report Posted October 8, 2007 (edited) whats the setup on those elkas? size, type of riding, type of arms, etc...? what kind of a arms and size? how many hours? Edited October 8, 2007 by Cykotik Quote
broke Posted October 8, 2007 Author Report Posted October 8, 2007 whats the setup on those elkas? size, type of riding, type of arms, etc...?what kind of a arms and size? how many hours? I will try to get in touch with the original owner or Elka directly to find out the build specs on these. Just in case my post got confusing, these are for a Honda, not a Banshee. Quote
docbones Posted October 8, 2007 Report Posted October 8, 2007 How much for complete airbox set-up? Thanks, Doc Quote
broke Posted October 9, 2007 Author Report Posted October 9, 2007 How much for complete airbox set-up?Thanks, Doc Doc, That part is being included with the frame, because it's built to tuck down in there and the next owner will have issues trying to find anything that will fit in there with out it. Thanks Quote
broke Posted October 9, 2007 Author Report Posted October 9, 2007 whats the setup on those elkas? size, type of riding, type of arms, etc...?what kind of a arms and size? how many hours? 18.5", MX, LT+3 or+4 arms(I think these may be +4s, but the Honda A-arms are so much different than the Banshee they may only be +3). Quote
broke Posted October 9, 2007 Author Report Posted October 9, 2007 whats the setup on those elkas? size, type of riding, type of arms, etc...?what kind of a arms and size? how many hours? 18.5", MX, +3 arms. I think the A-arms are +3+0, because the wheelbase can be changed in the frame itself. Weight I would "guess" in the 180lb range because they worked great for me. I wish I could give you better answers, but I don't really know that much about it. The arms were built be Shaffer who is the builder of the frame, swingarm, and steering stem. Quote
broke Posted October 13, 2007 Author Report Posted October 13, 2007 I'll bring this up one more time. Quote
2strokespirit Posted October 13, 2007 Report Posted October 13, 2007 Is it possible for some pics of the porting? Especially the transfers and exhaustport. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.