flattrakker Posted September 30, 2007 Report Posted September 30, 2007 hey guys, i was wondering what is acctually being milled on the stock head of you mill it .040 over. Does milling the head give the same performance as a cool head or is milling a head just for compression increase and nothing to do with cooling? someone needs to straighten this out for me.. please let me know.. thanks Quote
ClimbAnyHill Posted September 30, 2007 Report Posted September 30, 2007 The base of the head is shaved. By doing so it will lower your combustion chamber to increase compression. There are no changes to the water jackets. PM Rocketboy who can help you for a good price. Here's some pics: http://www.bansheehq.com/forums/index.php?showtopic=83626 Quote
locogato11283 Posted September 30, 2007 Report Posted September 30, 2007 you hit it right on. its for compression increase only. no decrease in cooling will be seen. if you want to make your engine run cooler, i recommend a noss head. Quote
flattrakker Posted October 1, 2007 Author Report Posted October 1, 2007 you hit it right on. its for compression increase only. no decrease in cooling will be seen. if you want to make your engine run cooler, i recommend a noss head. I dont need to run cooler considering im in wisconsin. I prolly should be thinking about a heating element to keep it warm when its running :yelrotflmao: JK! and most of my hours are in the winter. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.