New stator question

[elwilliams13]

Just got my 200watt stator and was wondering if you guys upgrade your stock lighting harness with some thicker wire(14g maybe 12) when you upgradr your stators. I got the higher capacity regulator and am running 2 PIAA 55watt and one 55watt flood to my low beam wire on the stock switch. Wondering if this will work or use another wire switch combo? I am deleting the stock headlights.

[375hp banshees]

what brand stator did you get

[Snopczynski]

Thats too much for the stock wiring. It can maybe at most handle 150 watts total.

[adrenaline junky]

Thats too much for the stock wiring. It can maybe at most handle 150 watts total.

 

Im running two 100 watt piaa lights and all ricky stator told me to do s to upgrade the regulater. And ive been running that way since last febuary.

[elwilliams13]

I got it from my local shop and he orders from Rick's Motorsport Electrics Inc. The shop owner had nothing but good things to say about then, We shall see the product has a 1 year warranty with it.

[375hp banshees]

I got it from my local shop and he orders from Rick's Motorsport Electrics Inc. The shop owner had nothing but good things to say about then, We shall see the product has a 1 year warranty with it.

good "ricky stators" have had a bad rep lately just gonna give ya a heads up

[elwilliams13]

Thanks for the heads up. I also noticed as I looked at it earlier instead of the one yellow wire and black one besides the plug, It has two yellow wires, one black ground wire and the square plug. Suppose it puts 100watts per yellow wire?

[Snopczynski]

Thats how the old RS 200w stators worked.

Edited September 27, 2007 by Snopczynski