kellettkustumz Posted September 1, 2007 Report Posted September 1, 2007 i got my 95 shee for a few weeks now... the rear bumper was all bent up so i welded it back into place... no problems right??? i got around to starting the bike like 30mins later nothing happening.... i pulled out the spark tester and no spark... what do you guys think would have burned up first... the cdi or the stator or both?? im pretty much stuck because i dont know where to start... Quote
Bansh-eman Posted September 1, 2007 Report Posted September 1, 2007 get out your multimeter and start at the stator. work your way to the cdi then to the coil. theres lot of things that can cause no spark. start at the power plant and move inwards until you find your problem. also make sure your pickup is set right if your gap is too much then that can cause it too Quote
kellettkustumz Posted September 1, 2007 Author Report Posted September 1, 2007 get out your multimeter and start at the stator. work your way to the cdi then to the coil. theres lot of things that can cause no spark. start at the power plant and move inwards until you find your problem. also make sure your pickup is set right if your gap is too much then that can cause it too is there any volts or ohms in particlar should be looking for?? Quote
BellicoseBanshee Posted September 2, 2007 Report Posted September 2, 2007 is there any volts or ohms in particlar should be looking for?? I read through this once a while ago..... Banshee Electrical FAQ The specifications are listed under the schematic. Quote
David Keith Posted September 2, 2007 Report Posted September 2, 2007 I read through this once a while ago..... Banshee Electrical FAQ The specifications are listed under the schematic. Electrical FAQ This sure is a great website. There is a wealth of info there. Quote
samc Posted September 4, 2007 Report Posted September 4, 2007 did you find your problem? this same thing happened to me.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.