asphault racing set up on 7 mill super cubs

[wickedshee]

i have an o6 shee with a 7 mm supercub set up with 39 mm pwk airstrikers and need to know what would be best for drag racing this shee i need sprocket recomendations please help me out guys thanks

[dynodon]

depends on a lot of things, tires, length of swing arm etc. I think I would start with something like a 16/43,or 41

[ORNANGE CRUSH]

depends on a lot of things, tires, length of swing arm etc. I think I would start with something like a 16/43,or 41

 

 

 

 

you should start with a 18/ 39 for 5 speed tranny asphault racing this will get you real close 16 /43 is a good sand gear

[wickedshee]

i have a 1 thru4 overide with bigbore sheerer inframe pipes and 39 pwk lockup i have the motor built already just want to have a good combo with this set up its for now on a stock swing arm i dont race it in the sand plain and simple asphault going up againsta 10 m 68 cub with his 38 mm pwk overide and all what do you gus think the outcome would be

[ORNANGE CRUSH]

i have a 1 thru4 overide with bigbore sheerer inframe pipes and 39 pwk lockup i have the motor built already just want to have a good combo with this set up its for now on a stock swing arm i dont race it in the sand plain and simple asphault going up againsta 10 m 68 cub with his 38 mm pwk overide and all what do you gus think the outcome would be

 

 

 

 

OK SO ITS A STAND UP BIKE YOU WILL NEED THE 17 /39 AND WITH A 1-4 YOU WILL STILL SHIFT 5TH AND 6TH OR RUN THE 18/ 39 RUN 5 GEARS

AND YOU WILL NEED TO RUN SOME GOOD REAR TIRES LIKE HOLESHOTS OR RAZER 2 A STREET TIRE WILL HOOK TO HARD WITH A STOCK SWING ARM

[locogato11283]

first, you should use some sort of punctuation in your posts. that will better help people to understand what youre talking about.

[bigboybanshee]

So you mean to tell me you forked out the coin for a 7mil super cub and didn't bother getting a longer swingarm, and plan to run asphalt? :shoothead: