Jump to content

Recommended Posts

Posted

i wanted to know about an over ride transmision. i always thought that having more gears would be quicker. is less gears better?

Posted

As far as losing gears in the tranny, you can make up for that with gearing on the bike. Mine is a 2-5 with 1st as a put around gear and I launch hard in 2nd, and am geared high enough that I dont need a 6th in the tranny.

Posted
Clutchless shifting.

Overrides are in many combos: 1-5,1-6,2-5,2-4, ect..

Never miss a shift.

 

 

how does the clutchless shifting work, and do u still have the other gears you just cant shift with them without the clutch

Posted

you can shift your stock trans without clutching it (just like "powershifting" a manual car). its just not good for it and will shorten the lifespan.

Posted

the trans are cut so all you need the clutch for is launching and at the end of your run, the lower gear combo's (1-4/2-4) usually still have 5th and 6th you would just need to use the clutch to get into those gears..

the higher gear combo's (1-5/2-5) usually dont have the 6th gear in it anymore..

 

depending on if you have straight cuts (overdriven) on your clutch basket it will change your final drive gearing.. the 2-5 im running has a straight cut basket and the gearing is 15 or 14/44 running 25in 16paddle extremes..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...