BlackBarron Posted June 13, 2007 Report Posted June 13, 2007 ok my bike has been sitting for about a 5 or 6 weeks and today i stated it up and i let it warm up and then i shifted in 1st and i noticed the bike kinda moved forward, with the clutch in i rev the bike just a little and the bike moved forward. so i thought i would just ride it anyway ( thinking that the oil just needed to cirulate) so i rode it down the road and then i went to a stop and the bile was still moving when i rev it even a little with the clutch in. i know how to adjust a clutch but the thing it, the clutch was perfect last time i rode it. does any one know what could cause this. thanks Quote
bigboybanshee Posted June 13, 2007 Report Posted June 13, 2007 I have the same problem on mine from time to time...I couldn't tell you exactly what's happening to cause it, maybe the cable stretching? I just adjust it at the clutch lever and it usually fixes it right up :thumbsup: Quote
swrbansheeboy Posted June 13, 2007 Report Posted June 13, 2007 more than likely its just because it sat so long and need's to be worked a bit to get the oil worked back between the plates. it could be that you have grooves worn into your clutch basket and there not allowing the clutches to spread when you pull the clutch lever but if it didnt do it when you parked it then it probly just needs to be worked a bit... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.