NoLimitzInc Posted April 25, 2007 Report Posted April 25, 2007 Does this look right? I bought the set used and didnt have any instructions at all with it, so I had to go off of just looking at it. I lined up the ball joints, but it does not look right to me. Please let me know. I think I have the uppers on backwards. Quote
Mullet Man Posted April 25, 2007 Report Posted April 25, 2007 (edited) grease zerks are facing up, i'm gonna say they are on right. besides, it looks like if you flipped the uppers that there would be too much of an angle on the rear upper arm and it would interfere with the shock. but it could just be optical. may be possible that the lowers are on wrong sides... what makes you think it isnt right? Edited April 25, 2007 by Mullet Man Quote
letsgetthisdone Posted April 25, 2007 Report Posted April 25, 2007 Looks good man. The lower arms should be swept formard a lil bit (like they are) and like mullet man said, it looks like you couldn't flip the upper arm around without interfering with the shock. Quote
NoLimitzInc Posted April 25, 2007 Author Report Posted April 25, 2007 no Im thinking I have the upper right on the left and the left on the right. That way being backwards not upside down. My bad on explaining it right. They just look funny for some reason. Quote
gregbowler Posted April 27, 2007 Report Posted April 27, 2007 Looks good to me. The upper ball joint should sit behind the lower Quote
banshee 4 fun Posted April 27, 2007 Report Posted April 27, 2007 yah there on right GOOD JOB!! you want the upper a-rm ball joint to be behind the lower a-arm ball joint Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.