CRAZY-SHEE! Posted April 9, 2007 Report Posted April 9, 2007 MY COOL HEAD FINALLY CAME! ok so my question is this.. i been running 91 octane premium pump gas on +4 timing. can i keep running this with the 1cc cool head and the +4 timing? anything else effect compression that i didnt know about? i had no idea timing effected compression! O.o Quote
yamaha04 Posted April 9, 2007 Report Posted April 9, 2007 (edited) MY COOL HEAD FINALLY CAME! ok so my question is this.. i been running 91 octane premium pump gas on +4 timing. can i keep running this with the 1cc cool head and the +4 timing? anything else effect compression that i didnt know about? i had no idea timing effected compression! O.o 1cc dome holy shit man you need rocket fuel. im jk man i think you might want to cheak that # again. 17cc/18cc/19cc/20cc/21cc/22cc/ and there are some smaller cc ones like 15 and 16 i think but im pretty sure they are special order or specialy made Edited April 9, 2007 by yamaha04 Quote
CRAZY-SHEE! Posted April 9, 2007 Author Report Posted April 9, 2007 lol i just missed the 2 man. lol its a 21 cc cool head. Quote
yamaha04 Posted April 9, 2007 Report Posted April 9, 2007 lol i just missed the 2 man. lol its a 21 cc cool head. should beable to run pump gas. its kinda the limit then you have to start a 50/50 mix depending on compression. but its always goo to cheap your compression after install just to make sure. if over umm around 155/160 then i would mix 50/50 race/pump but im sure with 21 you will be fine acouple of my freinds havent had any problems with that size Quote
SoCalinIt Posted April 9, 2007 Report Posted April 9, 2007 It's all a guessing game if you don't do a compression check, but I "think" you should be fine on 91. Quote
suzuki0702 Posted April 10, 2007 Report Posted April 10, 2007 autozone carries a great OEM compression tester for 29.95...go get it and make sure.....hold the throttle open when you do your test...kick it until the gauge doesnt go any higher.. Quote
bansheeboy02 Posted April 10, 2007 Report Posted April 10, 2007 (edited) autozone carries a great OEM compression tester for 29.95...go get it and make sure.....hold the throttle open when you do your test...kick it until the gauge doesnt go any higher.. I run 20cc domes on 93 octane and dont have a problem. I have run +4 and now and running +7, so I know they work. Edited April 10, 2007 by bansheeboy02 Quote
yamaha04 Posted April 10, 2007 Report Posted April 10, 2007 what elevation are you at and is it a freash topend? Quote
CRAZY-SHEE! Posted April 10, 2007 Author Report Posted April 10, 2007 i live in az so i think im somewherer around 0-1500 range. and i think its the original top end from like.. 20 years ago XD XD XD XD took the cylinders out and they have huge scratchs down the side... if i told u what the compression came out to be u would all make fun of me so lets just say.. i need a new top end and the compression iz LOOOOW. ( yea yea im working on it) :shrug: Quote
yamaha04 Posted April 10, 2007 Report Posted April 10, 2007 lol i was talking about bansheeboy02. he said he ran 20 cc domes and 93 octane. im accualy going to try and run this setup once i get my cyilinders back so i was just asking him if it was a freash topend and what elevation he was at. also what kinda compression is he running? Quote
Mynameismike Posted April 10, 2007 Report Posted April 10, 2007 Just wondering if anyone has ran E85 in a shee? E85 is 110 octane and much cheaper than race fuel. I was thinking about trying a mix with the oil, just curouis. Quote
bansheeboy02 Posted April 10, 2007 Report Posted April 10, 2007 lol i was talking about bansheeboy02. he said he ran 20 cc domes and 93 octane. im accualy going to try and run this setup once i get my cyilinders back so i was just asking him if it was a freash topend and what elevation he was at. also what kinda compression is he running? The top end is brand new .030 over and my elevation is 0 - 750 ft. I havnt checked the compression yet, I just put it together so I am working out the carb bugs. Quote
yamaha04 Posted April 12, 2007 Report Posted April 12, 2007 The top end is brand new .030 over and my elevation is 0 - 750 ft. I havnt checked the compression yet, I just put it together so I am working out the carb bugs. cool post back in here or pm me when you get it running good. i would like to know the compression and if your running race fuel mix yet. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.