notatallhappy Posted March 30, 2007 Report Posted March 30, 2007 Hi banshee gods i need help I just ordered some 35mm pwk air strikers for my shee. It has 18cc domes mild drag port and t5's im at 4500 feet and ride mostly in the sand. I run only 110 octane ( lowest you can get here ) and motul800 oil. My question is where is a good place to start on the main, pilot, and needle. Thanks for all your help!!! Quote
letsgetthisdone Posted April 3, 2007 Report Posted April 3, 2007 I wuld check your compression, you may not need to be running race gas in that motor. Quote
notatallhappy Posted April 4, 2007 Author Report Posted April 4, 2007 There is a lot of ethanol in the pump fuel where hence i dont want to lean out my bikes and the 110 runs cooler due to the lead, and the race fuel is much cleaner Quote
locogato11283 Posted April 5, 2007 Report Posted April 5, 2007 162 mains and 48 pilots will be a good start. you should be able to work down from there. CEL needle in the middle clip. whats the temp there? Quote
notatallhappy Posted April 5, 2007 Author Report Posted April 5, 2007 162 mains and 48 pilots will be a good start. you should be able to work down from there. CEL needle in the middle clip. whats the temp there? Thank you the temp here is about 75-80F where is a good place to purchase needles Quote
locogato11283 Posted April 6, 2007 Report Posted April 6, 2007 FAST should have the needles. call jeff @ 1-785-364-5325 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.