christ6 Posted March 23, 2007 Report Posted March 23, 2007 i am going to buy a noss head and am wondering what domes size i will need, i just went 40 over and and runnign wisecos, no porting, fmf fattys/powercore 2's, kn filter, boyessen reeds, and a dynojet kit my elevation is close to sea level maybe a few hunder feet max, i would like to bump the compression but i only want to run pump gas, also i may buy a wisecoe crank... would that be a good investment? thanks for any help guys...help fast please...need to have this thing running again in 2 weeks Quote
Bansh-eman Posted March 23, 2007 Report Posted March 23, 2007 i must say this 3 times a week but here we go again the only 100% for sure way to tell you what size dome is doing a compression test.. you "should" be able to run 20-22 domes but without doing a compression test theres no solid answer to give u Quote
christ6 Posted March 23, 2007 Author Report Posted March 23, 2007 compression test could be a little bit of a problem at the moment because the engine is in pieces on my bench and im waiting on some parts at the moment, last compression test i had i was 85 on one side and 95 on the other but that was when i blew er up so thats not really of any consequence Quote
christ6 Posted March 23, 2007 Author Report Posted March 23, 2007 im not looking for an end all answer more or less just a guideline of what people think with my mods i wont have to run race gas, a starting point at what i should purchase and and then tinker around from there if need be afterwards Quote
dlnoss Posted March 23, 2007 Report Posted March 23, 2007 I would say 21cc with premium pump gas but a compression test after it's put back together would be suggested. -David Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.