troykajoe Posted March 21, 2007 Report Posted March 21, 2007 I just purchased a new '06 banshee and I'm looking at pipes for it. The motor will remain stock with the addition of reeds, filters, and jetting. I'm considering (in this order); CPI inframes, Toomey T6, or possibly Sheerer. My question is... do any/all of these pipes require modifications to the front fenders to fit? It suddenly awned on me that thefenders may have to be cut. Thanks. Quote
yamaha04 Posted March 21, 2007 Report Posted March 21, 2007 well if you get t6 i know you will probably either have to shim your fenders out alittle by sticking washer under the bottom fender bracket or you can just cut away alittle. and the shears and cpi are fat as f#@$ so i would imagin you would have to trim more out or cut them off Quote
ClimbAnyHill Posted March 21, 2007 Report Posted March 21, 2007 My T5's fit fine under my fenders without any mods, that didn't last.. Shave em' off! Quote
bigboybanshee Posted March 21, 2007 Report Posted March 21, 2007 What kind of riding do you mostly do? TR6 is supposed to be a good all around pipe for stock engines...CPI's are more for top end but aren't as intense as shearers. I wouldn't recommend getting the shearers unless you do a lot of racing and/or have ported cylinders. Just my thoughts :shrug: Quote
jbooker82 Posted March 22, 2007 Report Posted March 22, 2007 If your not going to have the engine ported then say away from the CPI's and Sheerer. They are drag pipes and work the best with a drag port job. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.