thedurf Posted March 9, 2007 Report Posted March 9, 2007 (edited) ok, everything is back together and ready to go, and i really just don't feel like taking the shee yet again to the shop so it can spend another 3 weeks there. So i just wana tune it myself. Here are the specs: cylanders bored .80 over with intake and exaust port(nothing huge, just a bit more flow). Pro curcuit pipes and silencers, V force 3 reeds, TORS eliminated, And no air box, just 2 separated air filters. honestly i understand the whole principle of jetting and how it works, i just have no idea where to start from. By the way, i live in buffalo, NY. The bike was stock the last time it was ridden. I had it running a couple times since the parts/engine work and it ran really rich every time so i never let it run for long. Somebody give me some help! please.... Edited March 9, 2007 by thedurf Quote
dajogejr Posted March 9, 2007 Report Posted March 9, 2007 27.5 pilots (one up from stock) Because it's cold out...start with 360 mains. Look at your plugs. Elevation in Buffalo is a big higher than sea level, isn't it?? Quote
Banchetta Posted March 10, 2007 Report Posted March 10, 2007 ok, everything is back together and ready to go, and i really just don't feel like taking the shee yet again to the shop so it can spend another 3 weeks there. So i just wana tune it myself. Here are the specs: cylanders bored .80 over with intake and exaust port(nothing huge, just a bit more flow). Pro curcuit pipes and silencers, V force 3 reeds, TORS eliminated, And no air box, just 2 separated air filters. honestly i understand the whole principle of jetting and how it works, i just have no idea where to start from. By the way, i live in buffalo, NY. The bike was stock the last time it was ridden. I had it running a couple times since the parts/engine work and it ran really rich every time so i never let it run for long. Somebody give me some help! please.... I'd start w/ 300 mains, 30 pilots, needle 3rd clip...mains might be rich at 70 degrees out, depending on much they ported it....my shee had similiar mods and ran great w/ 270 mains at 70 degrees out w/ stock porting..You should be good w/ 300's at 40 degrees out though. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.